Main informations

Collections

National standards and national normative documents

Publication date

September 2004

Number of pages

22 p.

Reference

NF ISO 16462

ICS Codes

25.100.01 Cutting tools in general

Classification index

E66-317

Print number

1 - 20/09/2004

International kinship

ISO 16462:2004

Sumary

Cubic boron nitride inserts, tipped or solid - Dimensions, types

ISO 16462:2004 applies to inserts with insert shapes in accordance with ISO 883, ISO 3364, ISO 3365 and ISO 6987, tipped with cubic boron nitride (BL, BH, BC) or made of solid cubic boron nitride (BL, BH, BC).

Standard replaced by (1)

NF ISO 16462

August 2014

Standard Current

Cubic boron nitride inserts, tipped or solid - Dimensions, types

<p>ISO 16462:2014 applies to inserts with insert shapes in accordance with ISO 883, ISO 3364, ISO 3365, and ISO 6987, tipped with cubic boron nitride (BL, BH, BC) or made of solid cubic boron nitride (BL, BH, BC).</p>

Table of contents

View the extract

Avant-propos
iv
1 Domaine d'application
1
2 Références normatives
1
3 Formes des plaquettes et conception
1
3.1 Formes des plaquettes
1
3.2 Dépouille normale, an
1
3.3 Pointe de l'arête de coupe
2
3.4 Classe de tolérance
2
3.5 Conception des arêtes
2
3.6 Types de plaquettes
2
4 Désignation
2
4.1 Généralités
2
4.2 Désignation de plaquettes de tournage
2
4.3 Désignation d'une plaquette de fraisage brasée
3
5 Dimensions
3
5.1 Plaquette de forme T avec trou de fixation (plaquette de tournage)
3
5.2 Plaquette de forme S avec trou de fixation (plaquette de tournage)
5
5.3 Plaquette de forme C avec trou de fixation (plaquette de tournage)
6
5.4 Plaquette de forme D avec trou de fixation (plaquette de tournage)
7
5.5 Plaquette de forme V avec trou de fixation (plaquette de tournage)
8
5.6 Plaquette de forme S avec trou de fixation (plaquette de fraisage)
9
5.7 Plaquette de forme C avec trou de fixation (plaquette de fraisage)
10
5.8 Plaquettes de forme C, R, S et T sans trou de fixation (plaquettes de tournage)
11
5.9 Plaquettes de forme S et T sans trou de fixation (plaquettes de fraisage)
13
5.10 Plaquettes de forme S et T sans trou de fixation (plaquettes de fraisage)
14
5.11 Plaquette de forme W avec trou de fixation (plaquette de tournage)
15
5.12 Plaquette de forme W sans trou de fixation (plaquette de tournage)
16
6 Longueur de l'arête de coupe, h, des plaquettes brasées
17
6.1 Généralités
17
6.2 Plaquettes avec rayon de pointe
17
6.3 Plaquettes à arêtes vives
17
7 Matériau de base, matériau de coupe
18
8 Mesurage
18
9 Marquage
18

ZOOM ON ... the Requirements department

To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ