NF ISO 26802
Nuclear facilities - Criteria for the design and the operation of containment and ventilation systems for nuclear reactors
ISO 26802:2010 specifies the applicable requirements related to the design and the operation of containment and ventilation systems of nuclear power plants and research reactors taking into account the following. For nuclear power plants, ISO 26802:2010 addresses only reactors that have a secondary confinement system based on IAEA recommendations. For research reactors, ISO 26802:2010 applies specifically to reactors for which accidental situations can challenge the integrity or leak-tightness of the containment barrier, i.e. in which a high-pressure or -temperature transient can occur and for which the isolation of the containment building and the shut-off of the associated ventilation systems of the containment building is required. The requirements of ISO 26802:2010 apply to research reactors in which the increase of pressure or temperature during accidental situations do not risk damaging the ventilation systems, although the requirements applicable for the design and the use of ventilation systems are given in ISO 17873.
ISO 26802:2010 specifies the applicable requirements related to the design and the operation of containment and ventilation systems of nuclear power plants and research reactors taking into account the following.
For nuclear power plants, ISO 26802:2010 addresses only reactors that have a secondary confinement system based on IAEA recommendations.
For research reactors, ISO 26802:2010 applies specifically to reactors for which accidental situations can challenge the integrity or leak-tightness of the containment barrier, i.e. in which a high-pressure or -temperature transient can occur and for which the isolation of the containment building and the shut-off of the associated ventilation systems of the containment building is required.
The requirements of ISO 26802:2010 apply to research reactors in which the increase of pressure or temperature during accidental situations do not risk damaging the ventilation systems, although the requirements applicable for the design and the use of ventilation systems are given in ISO 17873.
- Avant-proposv
- Introductionvi
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions2
-
4 Fonctions assurées par le système de ventilation6
-
4.1 Généralités6
-
4.2 Principales fonctions assurées7
-
5 Architecture et description des différents systèmes de ventilation8
-
5.1 Ventilation des volumes à l'intérieur de la première enveloppe de confinement8
-
5.2 Ventilation des volumes situés à l'intérieur du confinement secondaire10
-
5.3 Ventilation des volumes situés à l'extérieur de la deuxième enveloppe de confinement11
-
5.4 Divers systèmes de ventilation non connectés aux enveloppes de confinement11
-
6 Aspects de sûreté des systèmes de ventilation12
-
6.1 Principes généraux12
-
6.2 Procédure d'évaluation des risques - Généralités12
-
6.3 Procédure d'évaluation des risques - Accidents graves15
-
7 Exigences pour la conception des systèmes de ventilation16
-
7.1 Confinement des matières radioactives16
-
7.2 Filtration34
-
7.3 Spécificités des réacteurs37
-
8 Gestion des risques spécifiques40
-
8.1 Surveillance des gaz combustibles dans le bâtiment réacteur40
-
8.2 Gestion des conditions d'ambiance40
-
8.3 Prévention des risques liés aux dégagements thermiques et aux rejets de gaz ou de vapeurs toxiques43
-
8.4 Prévention contre les dépôts de matières dans les conduits de ventilation43
-
8.5 Prévention des risques d'incendie43
-
8.6 Prise en compte des risques d'origine externe47
-
9 Dispositions relatives à l'exploitation et à la conduite des systèmes de ventilation48
-
9.1 Organisation et procédures d'exploitation48
-
9.2 Règles générales d'exploitation48
-
9.3 Exigences relatives à l'exploitation49
-
9.4 Modes opératoires d'essais et de maintenance49
-
9.5 Surveillance du système de ventilation53
-
9.6 Conduite du système de ventilation pour prévenir le risque d'incendie53
-
10 Contrôle commande et instrumentation55
-
10.1 Contrôle commande55
-
10.2 Instrumentation56
-
10.3 Alarmes57
- Annexe A (informative) Produits radioactifs généralement rencontrés dans les réacteurs nucléaires58
- Annexe B (informative) Exemples de concepts généraux du confinement dans les centrales nucléaires de puissance61
- Annexe C (informative) Systèmes de classification de sûreté pour les centrales nucléaires de puissance67
- Annexe D (informative) Exemples de classification des zones de travail selon les risques de contamination radiologique69
- Annexe E (informative) Exemple de classification des types de ventilation en fonction des risques de contamination radiologique - Recommandations concernant la configuration des systèmes de ventilation71
- Annexe F (informative) Exigences existantes relatives aux filtres à particules76
- Annexe G (informative) Exemples de charges à prendre en compte lors de la conception des systèmes de ventilation des réacteurs nucléaires de puissance81
- Annexe H (informative) Valeurs indicatives d'étanchéité pour les systèmes de confinement et de ventilation, et périodicité des contrôles associés82
- Annexe I (informative) État de la première enveloppe de confinement84
- Bibliographie85
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ