NF ISO 27048

NF ISO 27048

March 2011
Standard Current

Radiation protection - Dose assessment for the monitoring of workers for internal radiation exposure

ISO 27048:2011 specifies the minimum requirements for the evaluation of data from the monitoring of workers occupationally exposed to the risk of internal contamination by radioactive substances. It presents procedures and assumptions for the standardised interpretation of monitoring data, in order to achieve acceptable levels of reliability. Those procedures allow the quantification of exposures for the documentation of compliance with regulations and radiation protection programmes. Limits are set for the applicability of the procedures in respect of the dose levels above which more sophisticated methods will have to be applied. ISO 27048:2011 addresses the following: procedures for dose assessment based on reference levels for routine and special monitoring programmes; assumptions for the selection of dose-critical parameter values; criteria for determining the significance of monitoring results; interpretation of workplace monitoring results; uncertainties arising from sampling, measurement techniques and working conditions; the special topics of interpretation of multiple data arising from different measurement methods at different times, handling data below the decision threshold, rogue data, and calculation of doses to the embryo/foetus and infant; reporting/documentation; quality assurance. It is not applicable to the following: dosimetry for litigation cases; modelling for the improvement of internal dosimetry; the potential influence of decorporation measures (e.g. administration of chelating agents); the investigation of the causes or implications of an exposure; dosimetry for contaminated wounds.

See more
Document attached to the standard

One or more files are associated with this standard. After your purchase, you will find it (them) directly from your customer area, in the same place as the standard.

Main informations

Collections

National standards and national normative documents

Thematics

QSE, Sécurité, Gestion des risques et SST

Publication date

March 2011

Number of pages

0 p.

Reference

NF ISO 27048

ICS Codes

13.100   Occupational safety. Industrial hygiene
13.280   Radiation protection

Classification index

M60-601

Print number

1 - 24/02/2011

International kinship

ISO 27048:2011
Sumary
Radiation protection - Dose assessment for the monitoring of workers for internal radiation exposure

ISO 27048:2011 specifies the minimum requirements for the evaluation of data from the monitoring of workers occupationally exposed to the risk of internal contamination by radioactive substances. It presents procedures and assumptions for the standardised interpretation of monitoring data, in order to achieve acceptable levels of reliability. Those procedures allow the quantification of exposures for the documentation of compliance with regulations and radiation protection programmes. Limits are set for the applicability of the procedures in respect of the dose levels above which more sophisticated methods will have to be applied.

ISO 27048:2011 addresses the following: procedures for dose assessment based on reference levels for routine and special monitoring programmes; assumptions for the selection of dose-critical parameter values; criteria for determining the significance of monitoring results; interpretation of workplace monitoring results; uncertainties arising from sampling, measurement techniques and working conditions; the special topics of interpretation of multiple data arising from different measurement methods at different times, handling data below the decision threshold, rogue data, and calculation of doses to the embryo/foetus and infant; reporting/documentation; quality assurance.

It is not applicable to the following: dosimetry for litigation cases; modelling for the improvement of internal dosimetry; the potential influence of decorporation measures (e.g. administration of chelating agents); the investigation of the causes or implications of an exposure; dosimetry for contaminated wounds.

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ