NF ISO 2859-3
Sampling procedures for inspection by attributes - Part 3 : skip-lot sampling procedures
ISO 2859-3:2005 specifies generic skip-lot sampling procedures for acceptance inspection by attributes. The purpose of these procedures is to provide a way of reducing the inspection effort on products of high quality submitted by a supplier who has a satisfactory quality assurance system and effective quality controls. The reduction in inspection effort is achieved by determining at random, with a specified probability, whether a lot presented for inspection will be accepted without inspection. This procedure extends the principle of the random selection of sample items already applied in ISO 2859-1 to the random selection of lots. The skip-lot sampling procedures specified in ISO 2859-3:2005 are applicable to, but not limited to, inspection of end items, such as complete products or sub-assemblies, components and raw materials, and materials in process.
ISO 2859-3:2005 specifies generic skip-lot sampling procedures for acceptance inspection by attributes. The purpose of these procedures is to provide a way of reducing the inspection effort on products of high quality submitted by a supplier who has a satisfactory quality assurance system and effective quality controls. The reduction in inspection effort is achieved by determining at random, with a specified probability, whether a lot presented for inspection will be accepted without inspection. This procedure extends the principle of the random selection of sample items already applied in ISO 2859-1 to the random selection of lots.
The skip-lot sampling procedures specified in ISO 2859-3:2005 are applicable to, but not limited to, inspection of end items, such as complete products or sub-assemblies, components and raw materials, and materials in process.
La présente norme indique des procédures d'échantillonnage successif partiel pour les contrôles par attributs. Celles-ci permettent de réduire l'effort de contrôle en décidant (au hasard) si un lot normalement soumis au contrôle sera passé en fait sans contrôle. La présente norme doit être utilisée de pair avec la norme NF X 06-022.
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes, définitions et symboles1
-
3.1 Termes et définitions1
-
3.2 Symboles et termes abrégés3
-
4 Exigences générales3
-
5 Qualification du fournisseur et du produit4
-
5.1 Qualification du fournisseur4
-
5.2 Qualification du produit5
-
5.3 Score de qualification6
-
5.4 Exemple de qualification d'un produit8
-
6 Procédures d'échantillonnage successif partiel9
-
6.1 Généralités9
-
6.2 Fréquence de contrôle initiale et sa détermination10
-
6.3 Fréquence de contrôle et changement de fréquence12
-
6.4 Plans d'échantillonnage, sélection de lots et procédures de contrôle (États 2 et 3)15
-
6.5 Interruption du contrôle par échantillonnage successif partiel15
-
6.6 Requalification16
-
6.7 Disqualification du produit17
-
6.8 Disqualification du fournisseur et suspension18
-
7 Responsabilités du fournisseur18
-
8 Responsabilités de l'organisme de contrôle et de l'autorité responsable19
-
8.1 Généralités19
-
8.2 Responsabilités de la qualification du fournisseur19
-
8.3 Autres responsabilités20
-
9 Compatibilité avec l'ISO 2859-121
-
9.1 Limites21
-
9.2 Lien avec le contrôle réduit21
-
10 Renseignements complémentaires21
-
10.1 Base de la conception21
-
10.2 Caractéristiques statistiques des procédures d'échantillonnage successif partiel22
- Annexe A (normative) Résumé des options à confirmer avant la qualification du produit24
- Annexe B (normative) Procédures de sélection aléatoire à une fréquence de contrôle spécifiée26
- Annexe C (informative) Facteurs utilisés pour se décider entre un contrôle par échantillonnage successif partiel et un contrôle réduit28
- Bibliographie30
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ