NF ISO 6072
Rubber - Compatibility between hydraulic fluids and standard elastomeric materials
ISO 6072:2011 specifies test methods for evaluating the effect of hydraulic fluids on standard elastomeric materials that have been manufactured in accordance with specified processes. It allows baseline comparisons of fluids with standard elastomers. The standard provides formulations, mixing procedures and vulcanization procedures for five types of elastomeric composition: acrylonitrile-butadiene rubbers (NBR 1 and NBR 2), fluorocarbon rubber (FKM 2), ethylene propylene diene rubber (EPDM 1) and hydrogenated acrylonitrile-butadiene rubber (HNBR 1). These procedures evaluate the effect of mineral-based, fire-resistant and biodegradable hydraulic fluids on such compositions by measurement, under controlled conditions, of physical properties of standard test pieces of the elastomer before and after immersion in the fluids. The standard does not provide formulations of elastomeric materials for actual service, although service elastomers may be tested using these compatibility procedures if required.
ISO 6072:2011 specifies test methods for evaluating the effect of hydraulic fluids on standard elastomeric materials that have been manufactured in accordance with specified processes. It allows baseline comparisons of fluids with standard elastomers.
The standard provides formulations, mixing procedures and vulcanization procedures for five types of elastomeric composition: acrylonitrile-butadiene rubbers (NBR 1 and NBR 2), fluorocarbon rubber (FKM 2), ethylene propylene diene rubber (EPDM 1) and hydrogenated acrylonitrile-butadiene rubber (HNBR 1).
These procedures evaluate the effect of mineral-based, fire-resistant and biodegradable hydraulic fluids on such compositions by measurement, under controlled conditions, of physical properties of standard test pieces of the elastomer before and after immersion in the fluids.
The standard does not provide formulations of elastomeric materials for actual service, although service elastomers may be tested using these compatibility procedures if required.
Le présent document concerne les essais de compatibilité du couple fluide/caoutchouc dans les systèmes de transmissions hydrauliques. Il définit les formulations et les méthodes de mélange et de vulcanisation pour trois types de caoutchoucs d'essai.
Le présent document constitue la deuxième partie de la NF E 48-610, concernant les essais de compatibilité du couple fluide/caoutchouc dans les systèmes de transmissions hydrauliques. Il définit les méthodes d'essai permettant d'évaluer l'effet des fluides hydrauliques sur les caoutchoucs.
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions2
-
4 Élastomères d'essai2
-
4.1 Généralités2
-
4.2 Caoutchouc butadiène-nitrile acrylique de référence avec teneur en nitrile acrylique de 28 (NBR 1)2
-
4.3 Caoutchouc butadiène-nitrile acrylique de référence avec teneur en nitrile acrylique de 34 (NBR 2)4
-
4.4 Caoutchouc fluoré de référence (FKM 2)5
-
4.5 Caoutchouc éthylène-propylène-diène vulcanisé au peroxyde de référence (EPDM 1)7
-
4.6 Caoutchouc butadiène-nitrile acrylique hydrogéné de référence avec teneur en nitrile acrylique de 35 % (HNBR 1)8
-
5 Système de désignation pour l'indice de compatibilité des caoutchoucs (ECI)10
-
6 Détermination de l'ECI10
-
6.1 Conditions d'essai10
-
6.2 Détermination de la variation de volume, de la variation de dureté et de la variation de la résistance à la traction et de l'allongement à la rupture12
-
7 Rapport d'essai12
-
8 Phrase d'identification (référence à la présente Norme internationale)13
- Annexe A (informative) Informations complémentaires relatives aux fluides hydrauliques et aux types d'élastomères utilisés avec ceux-ci14
- Annexe B (informative) Exemple de rapport d'essai - Indice de compatibilité fluide-élastomère (ECI).16
- Annexe C (informative) Méthode rapide pour indiquer, par mesurage de l'indice de variation de volume (VCI), la variation de volume de caoutchoucs du commerce traités avec des huiles minérales17
- Bibliographie19
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ