NF ISO 6301-2

NF ISO 6301-2

July 2019
Standard Current

Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature

This document specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier's literature of lubricators conforming to ISO 6301‑1. This document can be applied: — to facilitate the comparison of lubricators by standardizing test methods and presentation of test data; — to assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2019

Number of pages

15 p.

Reference

NF ISO 6301-2

ICS Codes

23.100.99   Other fluid power system components

Classification index

E49-320-2

Print number

1

International kinship

Sumary
Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature

This document specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier's literature of lubricators conforming to ISO 6301‑1.

This document can be applied:

— to facilitate the comparison of lubricators by standardizing test methods and presentation of test data;

— to assist in the proper application of lubricators in compressed-air systems.

The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured.

Replaced standards (1)
NF ISO 6301-2
November 2006
Standard Cancelled
Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature

<p>This part of ISO 6301:2006 specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier's literature of lubricators conforming to ISO 6301-1.</p> <p>This part of ISO 6301:2006 can be applied</p> <ul><li>to facilitate the comparison of lubricators by standardizing test methods and presentation of test data;</li><li>to assist in the proper application of lubricators in compressed air systems.</li></ul> <p>The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured.</p>

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Unités et symboles
  • 5 Conditions et échantillons d'essai
  • 6 Mode opératoire pour vérifier la pression de fonctionnement
  • 7 Essais de débit d'air
  • 8 Mode opératoire pour déterminer le débit minimal de fonctionnement
  • 9 Mesurage de la capacité de la cuve
  • 10 Phrase d'identification
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ