NF ISO 8407

NF ISO 8407

January 2010
Standard Cancelled

Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens

ISO 8407:2009 specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this International Standard, the term “metals” refers to pure metals and alloys. The specified procedures are designed to remove all corrosion products without significant removal of base metal. This allows an accurate determination of the mass loss of the metal, which occurred during exposure to the corrosive environment. These procedures may, in some cases, also be applied to metal coatings. However, possible effects from the substrate must be considered.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2010

Number of pages

13 p.

Reference

NF ISO 8407

ICS Codes

77.060   Corrosion of metals

Classification index

A05-108

Print number

1 - 22/01/2010

International kinship

Sumary
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens

ISO 8407:2009 specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this International Standard, the term “metals” refers to pure metals and alloys.

The specified procedures are designed to remove all corrosion products without significant removal of base metal. This allows an accurate determination of the mass loss of the metal, which occurred during exposure to the corrosive environment.

These procedures may, in some cases, also be applied to metal coatings. However, possible effects from the substrate must be considered.

Replaced standards (1)
NF ISO 8407
June 2002
Standard Cancelled
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens

Standard replaced by (1)
NF EN ISO 8407
May 2014
Standard Cancelled
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens

<p>ISO 8407:2009 specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this International Standard, the term “metals” refers to pure metals and alloys.</p> <p>The specified procedures are designed to remove all corrosion products without significant removal of base metal. This allows an accurate determination of the mass loss of the metal, which occurred during exposure to the corrosive environment.</p> <p>These procedures may, in some cases, also be applied to metal coatings. However, possible effects from the substrate must be considered.</p>

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ