ISO 18475:2023

ISO 18475:2023

octobre 2023
Norme internationale En vigueur

Environmental solid matrices - Determination of polychlorinated biphenyls (PCB) by gas chromatography - mass selective detection (GC-MS) or electron-capture detection (GC-ECD)

This document specifies methods for quantitative determination of seven selected polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180) in soil, sludge, sediment, treated biowaste, and waste using GC-MS and GC-ECD (see Table 2).The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract.Under the conditions specified in this document, lower limit of application from 1 ?g/kg (expressed as dry matter) for soils, sludge and biowaste to 10 ?g/kg (expressed as dry matter) for solid waste can be achieved. For some specific samples the limit of 10 ?g/kg cannot be reached.Sludge, waste and treated biowaste may differ in properties, as well as in the expected contamination levels of PCB and presence of interfering substances. These differences make it impossible to describe one general procedure. This document contains decision tables based on the properties of the sample and the extraction and clean-up procedure to be used.NOTE            The analysis of PCB in insulating liquids, petroleum products, used oils and aqueous samples is referred to in EN 61619, EN 12766-1 and ISO 6468 respectively.The method can be applied to the analysis of other PCB congeners not specified in the scope, provided suitability is proven by proper in-house validation experiments. 

Visualiser l'extrait
Informations générales

Collections

Normes internationales ISO

Date de publication

octobre 2023

Nombre de pages

40 p.

Référence

ISO 18475:2023

Codes ICS

13.080.10   Propriétés chimiques des sols

Numéro de tirage

1
Résumé
Environmental solid matrices - Determination of polychlorinated biphenyls (PCB) by gas chromatography - mass selective detection (GC-MS) or electron-capture detection (GC-ECD)

This document specifies methods for quantitative determination of seven selected polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180) in soil, sludge, sediment, treated biowaste, and waste using GC-MS and GC-ECD (see Table 2).

The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract.

Under the conditions specified in this document, lower limit of application from 1 ?g/kg (expressed as dry matter) for soils, sludge and biowaste to 10 ?g/kg (expressed as dry matter) for solid waste can be achieved. For some specific samples the limit of 10 ?g/kg cannot be reached.

Sludge, waste and treated biowaste may differ in properties, as well as in the expected contamination levels of PCB and presence of interfering substances. These differences make it impossible to describe one general procedure. This document contains decision tables based on the properties of the sample and the extraction and clean-up procedure to be used.

NOTE            The analysis of PCB in insulating liquids, petroleum products, used oils and aqueous samples is referred to in EN 61619, EN 12766-1 and ISO 6468 respectively.

The method can be applied to the analysis of other PCB congeners not specified in the scope, provided suitability is proven by proper in-house validation experiments.

 

Normes remplacées (2)
ISO 13876:2013
novembre 2013
Norme internationale Annulée
Qualité du sol - Détermination des polychlorobiphényles (PCB) par chromatographie en phase gazeuse avec détection sélective de masse (GC-MS) et chromatographie en phase gazeuse avec détection par capture d'électrons (GC-ECD)

ISO 10382:2002
octobre 2002
Norme internationale Annulée
Qualité du sol - Dosages des pesticides organochlorés et des biphényles polychlorés - Méthode par chromatographie en phase gazeuse avec détection par capture d'électrons

L'ISO 10382:2002 spécifie une méthode de dosage quantitatif de sept biphényls polychlorés et de dix-sept pesticides organochlorés dans le sol. L'ISO 10382:2002 est applicable à tous les types de sol. Dans les conditions spécifiées dans l'ISO 10382:2002, les limites de détection de 0,1 g/kg à 4 g/kg (exprimées en matière sèche) peuvent être obtenues.

ZOOM SUR... le service Exigences
Pour respecter une norme, vous avez besoin de comprendre rapidement ses enjeux afin de déterminer son impact sur votre activité.

Le service Exigences vous aide à repérer rapidement au sein du texte normatif :
- les clauses impératives à satisfaire,
- les clauses non indispensables mais utiles à connaitre, telles que les permissions et les recommandations.

L’identification de ces types de clauses repose sur le document « Directives ISO/IEC, Partie 2 - Principes et règles de structure et de rédaction des documents ISO » ainsi que sur une liste de formes verbales constamment enrichie.

Avec Exigences, accédez rapidement à l’essentiel du texte normatif !

Avec Exigences, accédez rapidement à l'essentiel du texte normatif !
Besoin d’identifier, de veiller et de décrypter les normes ?

COBAZ est la solution simple et efficace pour répondre aux besoins normatifs liés à votre activité, en France comme à l’étranger.

Disponible sur abonnement, CObaz est LA solution modulaire à composer selon vos besoins d’aujourd’hui et de demain. Découvrez vite CObaz !

Demandez votre démo live gratuite, sans engagement

Je découvre COBAZ