ISO 11151-1:2015
Lasers and laser-related equipment - Standard optical components - Part 1 : Components for the UV, visible and near-infrared spectral ranges
ISO 11151-1:2015 specifies requirements for laser components used in the ultraviolet, visible, and near infrared spectral ranges, from wavelengths 170 nm to 2 100 nm, and facilitates the supply of spare parts by specifying preferred dimensions and tolerances, thereby reducing the variety of types, by standardizing the specifications and removing barriers to trade, and by establishing an agreed designation for item orders. ISO 11151-1:2015 covers planar, plano-spherical and spherical substrates, lenses, and optical components that are designed specifically as standardized optical components normally offered through a catalogue from suppliers and intended for use with lasers. ISO 11151-1:2015 includes component descriptions, materials employed, physical dimensions, and manufacturing tolerances (including surface finish, figure, and parallelism). Although most, but not all, of these components are coated (fully reflecting, partially reflecting or anti-reflecting) before incorporation into the laser system, ISO 11151-1:2015 does not include recommendations for the specification of coatings.
ISO 11151-1:2015 specifies requirements for laser components used in the ultraviolet, visible, and near infrared spectral ranges, from wavelengths 170 nm to 2 100 nm, and facilitates the supply of spare parts
- by specifying preferred dimensions and tolerances, thereby reducing the variety of types,
- by standardizing the specifications and removing barriers to trade, and
- by establishing an agreed designation for item orders.
ISO 11151-1:2015 covers planar, plano-spherical and spherical substrates, lenses, and optical components that are designed specifically as standardized optical components normally offered through a catalogue from suppliers and intended for use with lasers.
ISO 11151-1:2015 includes component descriptions, materials employed, physical dimensions, and manufacturing tolerances (including surface finish, figure, and parallelism). Although most, but not all, of these components are coated (fully reflecting, partially reflecting or anti-reflecting) before incorporation into the laser system, ISO 11151-1:2015 does not include recommendations for the specification of coatings.
<p> La présente partie de l'ISO 11151 spécifie les exigences pour les composants pour laser utilisés dans les plages spectrales proche de l'UV, visible et proche de l'infrarouge, pour les longueurs d'onde entre 190 nm et 2 100 nm, et vise à faciliter la fourniture de pièces détachées - en spécifiant des classes de dimensions et de tolérances préférentielles, d'où une réduction de la variété des types; - en normalisant les spécifications et en éliminant les entraves au commerce; - en établissant une désignation agréée à des fins de commande. La présente partie de l'ISO 11151 couvre les substrats plans, plan-sphériques et sphériques, les lentilles et les composants optiques qui sont considérés spécifiquement comme des composants optiques normalisés, proposés dans les catalogues des fabricants et censés être utilisés avec des lasers. La présente partie de l'ISO 11151 concerne les descriptions de composants, les matériaux employés, les dimensions physiques et les tolérances de fabrication (y compris le traitement, la courbure et le parallélisme des surfaces). Bien que la plupart, mais non la totalité, de ces composants, fassent l'objet d'un revêtement (totalement réfléchissant, partiellement réfléchissant ou anti-réfléchissant) avant leur incorporation au système laser, la présente partie de l'ISO 11151 n'énonce aucune recommandation ayant trait à la spécification des revêtements. <br/> <br/>NOTE : Dans le cas des composants optiques utilisés dans la plage spectrale infrarouge (> 2 100 nm), se reporter à l'ISO 11151-2. Pour la spécification et l'essai des revêtements optiques, se reporter aux Normes internationales de la série IS0 9211. </p>
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ