ISO 13909-3:2016 specifies procedures for the mechanical sampling of coal from stationary lots, for example, from wagons, barges, ships and stockpiles. These procedures are to be used when it is not possible to sample the lots during loading or discharge according to ISO 13909‑2:2016. Procedures for sample preparation are given in ISO 13909‑4:2016. ISO 13909-3:2016 is applicable to mechanical sampling from stationary coal lots, to obtain samples from which test samples for the determination of moisture, and for general analysis including physical and chemical tests, can be prepared in accordance with the requirements and recommendations set out in ISO 13909‑4:2016. In ISO 13909-3:2016, the principles and procedures for designing a sampling scheme are given, together with typical examples of applications; in addition, practices for the execution of sampling in different sampling situations are described. The methods described are limited to those on which it is possible to conduct a test for bias.
ISO 13909-3:2016 specifies procedures for the mechanical sampling of coal from stationary lots, for example, from wagons, barges, ships and stockpiles. These procedures are to be used when it is not possible to sample the lots during loading or discharge according to ISO 13909‑2:2016. Procedures for sample preparation are given in ISO 13909‑4:2016.
ISO 13909-3:2016 is applicable to mechanical sampling from stationary coal lots, to obtain samples from which test samples for the determination of moisture, and for general analysis including physical and chemical tests, can be prepared in accordance with the requirements and recommendations set out in ISO 13909‑4:2016.
In ISO 13909-3:2016, the principles and procedures for designing a sampling scheme are given, together with typical examples of applications; in addition, practices for the execution of sampling in different sampling situations are described. The methods described are limited to those on which it is possible to conduct a test for bias.
<p>L'ISO 13909-3:2001 définit les modes opératoires utilisés pour l'échantillonnage mécanique du charbon sur des lots statiques, par exemple sur des wagons, des péniches, des bateaux et des stocks. Les procédures concernant la préparation des échantillons sont détaillées dans l'ISO 13909-4.</p> <p>L'ISO 13909-3:2001 s'applique à l'échantillonnage mécanique sur des lots de charbon statiques dans le but d'obtenir des échantillons à partir desquels des échantillons d'essai peuvent être préparés, conformément aux exigences et recommandations stipulées dans l'ISO 13909-4, pour le calcul de l'humidité, pour une analyse générale comprenant des essais chimiques et physiques ainsi que pour une analyse des dimensions.</p> <p>Dans l'ISO 13909-3:2001 sont décrits les principes et procédures relatifs à la conception d'un programme d'échantillonnage, ainsi que des exemples types d'applications. Par ailleurs, les pratiques pour l'exécution de l'échantillonnage dans différentes situations sont décrites. Les méthodes décrites se limitent à celles sur lesquelles il est possible d'effectuer un essai pour la détection du biais.</p>
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ