ISO 8178-6:2018

ISO 8178-6:2018

April 2018
International standard Current

Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test

ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required engine, test cell and test data information is made available. ISO 8178-6:2018 applies to measurement in the laboratory and, where applicable, at site. For engines used in machinery covered by additional requirements (e.g. occupational health and safety regulations, dust regulations for powerplants), additional test conditions and special evaluation methods can apply. NOTE Since the report format defined in this document is intended to be applicable to all types of internal combustion engines, some items are, in certain cases, not necessary for specific engines and/or tests, especially when measuring on site. On the other hand, some additional items can be necessary according to test purposes. Deletion and addition of items to be reported are based on agreement between the parties involved.

View the extract
Main informations

Collections

International ISO standards

Publication date

April 2018

Number of pages

29 p.

Reference

ISO 8178-6:2018

ICS Codes

27.020   Internal combustion engines
13.040.50   Transport exhaust emissions

Print number

1
Sumary
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test

ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required engine, test cell and test data information is made available.

ISO 8178-6:2018 applies to measurement in the laboratory and, where applicable, at site.

For engines used in machinery covered by additional requirements (e.g. occupational health and safety regulations, dust regulations for powerplants), additional test conditions and special evaluation methods can apply.

NOTE Since the report format defined in this document is intended to be applicable to all types of internal combustion engines, some items are, in certain cases, not necessary for specific engines and/or tests, especially when measuring on site. On the other hand, some additional items can be necessary according to test purposes. Deletion and addition of items to be reported are based on agreement between the parties involved.

Replaced standards (1)
ISO 8178-6:2000
November 2000
International standard Cancelled
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test

<p> La présente partie de l'ISO 8178 spécifie un format standard de rapport de mesure et d'essai pour consigner le résultat des mesurages des émissions des gaz d'échappement des moteurs alternatifs à combustion interne utilisés dans les installations mobiles, transportables et fixes, à l'exclusion des moteurs de véhicules conçus à l'origine pour des applications routières. La présente partie de l'ISO 8178 peut être appliquée aux moteurs utilisés, par exemple pour les engins de terrassement, pour les groupes électrogènes et pour d'autres applications. La présente partie de l'ISO 8176 s'applique au mesurage tant en laboratoire que sur site. Pour les moteurs utilisés dans des machines couvertes par des exigences supplémentaires (par exemple, réglementation relative à l'hygiène et à la sécurité du travail, réglementation relative aux poussières des installations de production d'énergie), des conditions d'essai supplémentaires et des méthodes d'évaluation spéciales peuvent s'appliquer. NOTE: Comme le format standard du rapport défini dans la présente partie de l'ISO 8176 est applicable à tous les types de moteurs à combustion interne, certains points peuvent ne pas s'appliquer pour des moteurs et/ou des essais spécifiques, particulièrement lors du mesurage sur site. D'un autre côté, certains points supplémentaires pourraient être nécessaires suivant l'objectif des essais. L'adjonction ou la suppression de points à consigner feront l'objet d'un accord entre les parties concernées. </p>

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ