NF EN ISO 14720-2

NF EN ISO 14720-2

April 2013
Standard Current

Testing of ceramic raw and basic materials - Determination of content of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2 : inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow

This part of ISO 14720 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, which are completely oxidized at a higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials. For materials which are not completely oxidizable under these conditions, it is possible to determine sulfur that can be released under these conditions, e.g. the adherent sulfur. This part of ISO 14720 is applicable for materials with mass fractions of sulfur ≤ 10 % and mass fractions of ash < 20 %, The defined method is limited for materials with mass fractions of barium < 10 mg/kg, because the sulfur bonded in barium sulfate is not detectable with this method. For the lower detection limit of this method, a mass fraction of sulfur of 0,5 mg/kg in the case of inductively coupled plasma optical emission spectrometry (ICP/OES) and 5 mg/kg in the case of ion chromatography (IC) has to be considered as a recommended value.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

April 2013

Number of pages

24 p.

Reference

NF EN ISO 14720-2

ICS Codes

81.060.10   Raw materials

Classification index

B40-675-2

Print number

1 - 15/04/2013

International kinship

European kinship

EN ISO 14720-2:2013
Sumary
Testing of ceramic raw and basic materials - Determination of content of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2 : inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow

This part of ISO 14720 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, which are completely oxidized at a higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials.

For materials which are not completely oxidizable under these conditions, it is possible to determine sulfur that can be released under these conditions, e.g. the adherent sulfur.

This part of ISO 14720 is applicable for materials with mass fractions of sulfur ≤ 10 % and mass fractions of ash < 20 %, The defined method is limited for materials with mass fractions of barium < 10 mg/kg, because the sulfur bonded in barium sulfate is not detectable with this method.

For the lower detection limit of this method, a mass fraction of sulfur of 0,5 mg/kg in the case of inductively coupled plasma optical emission spectrometry (ICP/OES) and 5 mg/kg in the case of ion chromatography (IC) has to be considered as a recommended value.

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principe
    2
  • 5 Interférences
    2
  • 5.1 ICP/OES
    2
  • 5.2 Chromatographie ionique
    3
  • 6 Appareillage
    3
  • 7 Réactifs
    3
  • 8 Échantillonnage et préparation de l'échantillon
    4
  • 9 Préparation
    4
  • 9.1 Dispositif de combustion
    4
  • 9.2 Oxygène (7.10)
    4
  • 9.3 Spectromètre d'émission optique avec plasma induit par haute fréquence (6.7)
    4
  • 9.4 Chromatographe ionique (6.8)
    4
  • 10 Étalonnage
    5
  • 10.1 Spectromètre d'émission optique avec plasma induit par haute fréquence
    5
  • 10.2 Chromatographe ionique
    5
  • 11 Performance
    5
  • 11.1 Détermination de la valeur à blanc
    5
  • 11.2 Dosage du soufre
    5
  • 12 Calcul et consignation des résultats
    6
  • 13 Fidélité
    6
  • 13.1 Répétabilité
    6
  • 13.2 Reproductibilité
    6
  • 14 Rapport d'essai
    7
  • Annexe A (informative) Exemple de dispositif de combustion
    8
  • Annexe B (informative) Exemple de paramètres opérationnels appropriés pour le dosage du soufre par chromatographie ionique
    9
  • Annexe C (informative) Exemple de paramètres opérationnels appropriés pour le dosage du soufre par chromatographie d'émission optique avec plasma induit par haute fréquence
    10
  • Annexe D (informative) Résultats de l'essai interlaboratoires
    11
  • Annexe E (informative) Informations relatives à la validation de l'incertitude de la valeur moyenne
    14
  • Annexe F (informative) Matériaux de référence certifiés commerciaux (MRC)
    15
  • Bibliographie
    16
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ