NF EN ISO 15011-5
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5 : identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry
ISO 15011-5:2011 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening metal treated with coatings composed wholly or partly of organic substances, e.g. shop primers, paints, oils, waxes and inter‑weld materials such as adhesives and sealants. It is aimed primarily at test laboratories performing such procedures. The data generated can be used by coating manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to identify thermal degradation products of significance in the performance of risk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplace exposure directly. ISO 15011-5:2011 is applicable to all coatings composed partly or wholly of organic materials that can be heated, during welding and cutting, preheating and straightening to temperatures at which thermal degradation products are generated and where it is not apparent what those degradation products are.
ISO 15011-5:2011 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening metal treated with coatings composed wholly or partly of organic substances, e.g. shop primers, paints, oils, waxes and inter‑weld materials such as adhesives and sealants. It is aimed primarily at test laboratories performing such procedures. The data generated can be used by coating manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to identify thermal degradation products of significance in the performance of risk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplace exposure directly.
ISO 15011-5:2011 is applicable to all coatings composed partly or wholly of organic materials that can be heated, during welding and cutting, preheating and straightening to temperatures at which thermal degradation products are generated and where it is not apparent what those degradation products are.
- Avant-proposv
- Introductionvi
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions1
-
4 Principe2
-
5 Mode opératoire3
-
5.1 Identification des produits de dégradation thermique3
-
5.2 Analyse des données3
-
6 Utilisation de données sur les produits de dégradation thermique3
-
7 Rapport d'essai3
- Annexe A (normative) Mode opératoire d'essai4
- Annexe B (informative) Pyroliseurs6
- Annexe C (informative) Conditions chromatographiques8
- Annexe D (informative) Contrôles du système et des performances9
- Annexe E (informative) Exemple de rapport d'essai11
- Annexe F (informative) Utilisation de données concernant les produits de dégradation thermique13
- Bibliographie14
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ