NF EN ISO 18563-2

NF EN ISO 18563-2

August 2017
Standard Current

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes

ISO 18563-2:2017 specifies the characterization tests performed at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria. ISO 18563-2:2017 is applicable to the following phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz to 10 MHz: a) non-matrix array probes: - linear; - encircling; - partial annular sectorial (type "daisy"); b) 2D-matrix array probes. ISO 18563-2:2017 does not give methods and acceptance criteria to characterize the performance of an ultrasonic phased array instrument or the performance of a combined system. These are given in ISO 18563?1 and in ISO 18563?3.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

August 2017

Number of pages

17 p.

Reference

NF EN ISO 18563-2

ICS Codes

19.100   Non-destructive testing

Classification index

A09-022-2

Print number

1

International kinship

ISO 18563-2:2017

European kinship

EN ISO 18563-2:2017
Sumary
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes

ISO 18563-2:2017 specifies the characterization tests performed at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria.

ISO 18563-2:2017 is applicable to the following phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz to 10 MHz:

a) non-matrix array probes:

  • - linear;
  • - encircling;
  • - partial annular sectorial (type "daisy");

b) 2D-matrix array probes.

ISO 18563-2:2017 does not give methods and acceptance criteria to characterize the performance of an ultrasonic phased array instrument or the performance of a combined system. These are given in ISO 18563?1 and in ISO 18563?3.

Replaced standards (1)
NF EN 16392-2
April 2014
Standard Cancelled
Non destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 : probes

Le présent document traite des traducteurs multi-éléments linéaires utilisés pour les essais non destructifs par ultrasons - selon la technique par contact (avec ou sans sabot) ou selon la technique par immersion - ayant une fréquence centrale comprise entre 0,5 MHz et 10 MHz. Le présent document spécifie les essais de caractérisation qui doivent être effectués à l'issue de la fabrication d'un traducteur multi-élément. Il définit à la fois la méthodologie et les critères d'acceptation. Le présent document ne décrit pas les méthodes et critères d'acceptation permettant de caractériser les performances d'un appareillage de contrôle multi-élément par ultrasons ni celles d'un système complet. Ces performances sont décrites dans le prNF EN ISO 18563-1 et le prNF EN ISO 18563-3.

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles
  • 5 Conformité générale
  • 6 Informations techniques relatives aux traducteurs multiéléments
  • 7 Appareillage de contrôle
  • 8 Essais de performance des traducteurs multiéléments
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ