NF EN ISO 19932-1

NF EN ISO 19932-1

July 2013
Standard Current

Equipment for crop protection - Knapsack sprayers - Part 1 : safety and environmental requirements

ISO 19932-1:2013 specifies the safety and environmental requirements and their means of verification for the design and construction of knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic pressure atomisation of the spray liquid, with a nominal volume of more than 3 l, for their intended use primarily in agriculture and horticulture. It does not apply to knapsack mistblowers according to ISO 28139. ISO 19932-1:2013 deals with all significant hazards, hazardous situations and hazardous events relevant to knapsack sprayers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, excepting the hazards arising from: static electricity; explosion or fire from chemicals for spraying; and insufficient structural integrity. ISO 19932-1:2013 is not applicable to knapsack sprayers which are manufactured before the date of its publication.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2013

Number of pages

30 p.

Reference

NF EN ISO 19932-1

ICS Codes

65.060.40   Plant care equipment

Classification index

U26-140-1

Print number

1 - 11/07/2013

International kinship

ISO 19932-1:2013

European kinship

EN ISO 19932-1:2013
Sumary
Equipment for crop protection - Knapsack sprayers - Part 1 : safety and environmental requirements

ISO 19932-1:2013 specifies the safety and environmental requirements and their means of verification for the design and construction of knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic pressure atomisation of the spray liquid, with a nominal volume of more than 3 l, for their intended use primarily in agriculture and horticulture.

It does not apply to knapsack mistblowers according to ISO 28139.

ISO 19932-1:2013 deals with all significant hazards, hazardous situations and hazardous events relevant to knapsack sprayers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, excepting the hazards arising from: static electricity; explosion or fire from chemicals for spraying; and insufficient structural integrity.

ISO 19932-1:2013 is not applicable to knapsack sprayers which are manufactured before the date of its publication.

Replaced standards (1)
NF ISO 19932-1
June 2006
Standard Cancelled
Equipment for crop protection - Knapsack sprayers - Part 1 : requirements and test methods

<p>ISO 19932-1:2006 specifies the requirements and test methods for manually operated knapsack sprayers with a nominal tank volume of 5 l or more. It is applicable to lever-operated knapsack sprayers and knapsack compression sprayers for their intended use in, for example, agriculture and horticulture.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Exigences générales
    3
  • 4.1 Généralités
    3
  • 4.2 Harnais
    4
  • 4.3 Cuve
    5
  • 4.4 Commandes
    6
  • 4.5 Tuyaux flexibles
    6
  • 4.6 Filtres
    7
  • 4.7 Lance et buses de pulvérisation
    7
  • 5 Exigences spécifiques pour les pulvérisateurs à dos à pression entretenue
    8
  • 5.1 Généralités
    8
  • 5.2 Cuve
    8
  • 6 Exigences spécifiques pour les pulvérisateurs à dos à moteur ou moteur électrique
    8
  • 6.1 Généralités
    8
  • 6.2 Cuve
    9
  • 6.3 Commandes
    9
  • 6.4 Composants animés
    10
  • 6.5 Réservoir de carburant
    10
  • 6.6 Parties chaudes
    10
  • 6.7 Système d'échappement des gaz
    11
  • 6.8 Parties sous haute tension
    11
  • 6.9 Immunité électromagnétique
    11
  • 6.10 Bruit
    11
  • 6.11 Vibrations
    12
  • 7 Exigences spécifiques pour les pulvérisateurs à pression préalable
    12
  • 7.1 Généralités
    12
  • 7.2 Harnais
    12
  • 7.3 Cuve
    12
  • 8 Informations pour l'utilisation
    13
  • 8.1 Notice d'instructions
    13
  • 8.2 Marquage
    16
  • 8.3 Avertissements
    16
  • Annexe A (informative) Liste des phénomènes dangereux significatifs
    17
  • Bibliographie
    18
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ