NF ISO 10110-5

NF ISO 10110-5

October 2015
Standard Current

Optics and photonics - Preparation of drawings for optical elements and systems - Part 5 : surface form tolerances

ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation. NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more important. Therefore, unlike in the earlier versions of this part of ISO 10110, nanometres shall now be the preferred and standard unit to express surface form deviations. The usage of fringe spacings is still permitted given that the base wavelength is explicitly stated. ISO 10110-5:2015 applies to surfaces of plano, spherical, aspheric, circular and non-circular cylindric, and toric form as well as to surfaces of other non-spherical shape such as generally described surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, and micro-optical surfaces.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2015

Number of pages

26 p.

Reference

NF ISO 10110-5

ICS Codes

01.100.20   Mechanical engineering drawings
37.020   Optical equipment

Classification index

S10-008-5

Print number

1

International kinship

ISO 10110-5:2015
Sumary
Optics and photonics - Preparation of drawings for optical elements and systems - Part 5 : surface form tolerances

ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.

ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation.

NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more important. Therefore, unlike in the earlier versions of this part of ISO 10110, nanometres shall now be the preferred and standard unit to express surface form deviations. The usage of fringe spacings is still permitted given that the base wavelength is explicitly stated.

ISO 10110-5:2015 applies to surfaces of plano, spherical, aspheric, circular and non-circular cylindric, and toric form as well as to surfaces of other non-spherical shape such as generally described surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, and micro-optical surfaces.

Replaced standards (1)
NF ISO 10110-5
January 2008
Standard Cancelled
Optics and photonics - Preparation of drawings for optical elements and systems - Part 5 : surface form tolerances

Le présent document constitue la cinquième partie de la norme NF ISO 10110 relative aux indications sur les dessins d'optique, et s'applique aux indications de tolérances de forme. La série de l'ISO 10110 spécifie la présentation des exigences de conception et des exigences fonctionnelles applicables aux éléments et systèmes optiques sur les dessins techniques utilisés pour la fabrication et le contrôle.

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Spécification des tolérances portant sur l'écart de forme de surface
  • 5 Indication figurant sur les dessins
  • 6 Exemples d'indications de tolérances
  • Annexe A (informative)Relation entre la tolérance de l'écart de puissance et la tolérance du rayon de courbure
  • Annexe B (informative)Comparaison avec l'ISO 10110-5 et l'ISO 14999-4 nomenclature, fonctions et valeurs correspondantes
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ