NF ISO 11336-1
Large yachts - Strength, weathertightness and watertightness of glazed openings - Part 1 : design criteria, materials, framing and testing of independent glazed openings
ISO 11336-1:2012 specifies technical requirements for glazed openings on large yachts, taking into account navigation conditions, and the location of the opening. Large yachts are yachts with length of the hull, LH, higher or equal to 24 m, in use for sport or pleasure and commercial operations, with a tonnage limitation up to 3 000 gross tonnage, according to the International Tonnage Convention. The opening and the associated closing appliances considered in ISO 11336-1:2012 are only those that are above the deepest waterline (dsw) and are critical for the ship integrity related to weathertightness and watertightness, i.e. those that could lead to ingress of water in the hull in case of rupture of the pane. The scope of ISO 11336-1:2012 is related to and limited to independent glazed openings.
ISO 11336-1:2012 specifies technical requirements for glazed openings on large yachts, taking into account navigation conditions, and the location of the opening.
Large yachts are yachts with length of the hull, LH, higher or equal to 24 m, in use for sport or pleasure and commercial operations, with a tonnage limitation up to 3 000 gross tonnage, according to the International Tonnage Convention.
The opening and the associated closing appliances considered in ISO 11336-1:2012 are only those that are above the deepest waterline (dsw) and are critical for the ship integrity related to weathertightness and watertightness, i.e. those that could lead to ingress of water in the hull in case of rupture of the pane.
The scope of ISO 11336-1:2012 is related to and limited to independent glazed openings.
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions2
-
4 Symboles et termes abrégés7
-
5 Critères de conception8
-
5.1 Généralités8
-
5.2 Résistance9
-
5.3 Étanchéité9
-
5.4 Étanchéité aux intempéries10
-
5.5 Charges de conception10
-
5.6 Détermination de l'échantillonnage des plaques13
-
6 Encadrement19
-
6.1 Types d'encadrement20
-
6.2 Dimensions de l'encadrement21
-
6.3 Patins de support22
-
6.4 Exigences concernant les matériaux de l'encadrement22
-
7 Matériaux23
-
7.1 Sélection des matériaux23
-
7.2 Essais des matériaux25
-
7.3 Essai des équipements27
-
8 Tapes d'obturation et contre-tapes31
-
8.1 Tapes d'obturation32
-
8.2 Contre-tapes35
-
8.3 Manuel du propriétaire36
- Annexe A (normative) Dimensions entre appuis d'une plaque37
- Annexe B (normative) Calcul de la rigidité d'une plaque39
- Annexe C (informative) Équation d'échantillonnage40
- Annexe D (informative) Coefficient statistique, Kn, et exemple de calcul41
- Annexe E (informative) Exemples de calcul d'épaisseur équivalente pour des feuilletés de type A42
- Annexe F (informative) Exemples de calcul d'épaisseur équivalente pour des feuilletés de type B44
- Annexe G (informative) Pression de conception en remplacement de tapes d'obturation45
- Annexe H (normative) Largeur de bordé associé47
- Bibliographie49
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ