NF ISO 23233

NF ISO 23233

April 2016
Standard Current

Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc

ISO 23233:2016 a method for the determination of the resistance of rubber to abrasion using a driven, vertical abrasive disc. The loss in mass on abrasion is determined through the slip caused by setting different slip angles and rotational speeds between a wheel-shaped rubber test piece and an abrasive disc which are rotating in planes at right angles to each other and pressed against each other with a specified load. The test result can be reported as the loss in mass per unit running distance and/or as an abrasion resistance index compared to a reference compound. ISO 23233:2016 is applicable to comparative testing, quality control, specification compliance testing, referee testing and research and development work. As the test device described is capable of setting each abrasion parameter, such as slip angle, rotational speed of the abrasive disc and load, independently, the method is suitable for carrying out a wide range of abrasion tests for various rubber products, especially tyres.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

April 2016

Number of pages

14 p.

Reference

NF ISO 23233

ICS Codes

83.060   Rubber

Classification index

T46-087

Print number

1

International kinship

ISO 23233:2015
Sumary
Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc

ISO 23233:2016 a method for the determination of the resistance of rubber to abrasion using a driven, vertical abrasive disc.

The loss in mass on abrasion is determined through the slip caused by setting different slip angles and rotational speeds between a wheel-shaped rubber test piece and an abrasive disc which are rotating in planes at right angles to each other and pressed against each other with a specified load. The test result can be reported as the loss in mass per unit running distance and/or as an abrasion resistance index compared to a reference compound.

ISO 23233:2016 is applicable to comparative testing, quality control, specification compliance testing, referee testing and research and development work.

As the test device described is capable of setting each abrasion parameter, such as slip angle, rotational speed of the abrasive disc and load, independently, the method is suitable for carrying out a wide range of abrasion tests for various rubber products, especially tyres.

Replaced standards (1)
NF ISO 23233
May 2009
Standard Cancelled
Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc

Le présent document spécifie une méthode de détermination de la résistance à l'abrasion du caoutchouc à l'aide de l'appareil Laboratory Abrasion Tester 100 (LAT 100). Il peut être utilisé pour des essais comparatifs, de contrôle de la qualité, de conformité aux spécifications, pour des besoins d'arbitrage et pour des travaux de recherche et de développement.

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Appareillage
  • 6 Éprouvettes
  • 7 Conditionnement
  • 8 Température d'essai
  • 9 Conditions d'essai
  • 10 Mode opératoire
  • 11 Expression des résultats[2] à [6]
  • 12 Rapport d'essai
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ