NF ISO 4647

NF ISO 4647

November 2010
Standard Cancelled

Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test

ISO 4647:2010 specifies a method for the determination of the static adhesion of textile cord to vulcanized rubber using the H‑pull test. It is applicable to cords made from natural or man-made fibres. The property levels obtained with this method are affected considerably by the history of the cord and the rubber compound. The method yields data, however, on which a judgement as to the service quality of the material can be based. The method is primarily intended for use with tyre cord. However, it can be applied, if desired, to similar cords for use in other rubber products, but it is limited to cords of linear density not exceeding 800 mg/m (tex).

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2010

Number of pages

18 p.

Reference

NF ISO 4647

ICS Codes

83.060   Rubber

Classification index

T46-049

Print number

1 - 28/10/2010

International kinship

ISO 4647:2010
Sumary
Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test

ISO 4647:2010 specifies a method for the determination of the static adhesion of textile cord to vulcanized rubber using the H‑pull test. It is applicable to cords made from natural or man-made fibres.

The property levels obtained with this method are affected considerably by the history of the cord and the rubber compound. The method yields data, however, on which a judgement as to the service quality of the material can be based.

The method is primarily intended for use with tyre cord. However, it can be applied, if desired, to similar cords for use in other rubber products, but it is limited to cords of linear density not exceeding 800 mg/m (tex).

Replaced standards (1)
NF ISO 4647
August 1987
Standard Cancelled
Rubber vulcanised. Determination of static adhesion to textile cord. H-pull test.

Standard replaced by (1)
NF ISO 4647
October 2021
Standard Current
Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test

<p>This document specifies a method for the determination of the static adhesion of textile cord to vulcanized rubber using the H-pull test. It is applicable to cords made from natural or man-made fibres.</p> <p>The property levels obtained with this method are affected considerably by the history of the cord and the rubber compound. The method yields data, however, on which a judgement as to the service quality of the material can be based.</p> <p>The method is primarily intended for use with tyre cord. However, it can be applied, if desired, to similar cords for use in other rubber products, but it is limited to cords of linear density not exceeding 800 mg/m (tex).</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Principe
    1
  • 4 Matériaux
    2
  • 5 Appareillage
    2
  • 6 Étalonnage
    5
  • 7 Éprouvette
    5
  • 7.1 Dimensions
    5
  • 7.2 Préparation
    5
  • 7.3 Nombre d'éprouvettes
    8
  • 8 Délai entre vulcanisation et essai
    8
  • 9 Conditionnement des éprouvettes
    8
  • 10 Température de l'essai
    8
  • 11 Mode opératoire
    9
  • 11.1 Essai à température normale de laboratoire
    9
  • 11.2 Essai à température élevée
    9
  • 12 Expression des résultats
    9
  • 13 Rapport d'essai
    9
  • Annexe A (informative) Préparation des barrettes recouvertes de caoutchouc de silicone
    11
  • Annexe B (normative) Programme d'étalonnage
    13
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ