NF ISO 6474-2
Implants for surgery - Ceramic materials - Part 2 : composite materials based on a high-purity alumina matrix with zirconia reinforcement
This document specifies the characteristics of, and corresponding test methods for bio-stable ceramic-bone-substitute material based on a zirconia-reinforced, high-purity alumina matrix composite for use as bone spacers, bone replacements and components in orthopaedic joint prostheses. This document is intended for composite materials which are based on an alumina matrix, i.e. alumina as the dominating phase in the composite with a mass fraction of >60 %, similar to the material described in ISO 6474‑1, but extended by means of a certain amount of zirconia and other defined ingredients. NOTE The required properties in this document differ from those in ISO 6474‑1 with respect to strength and fracture toughness. Furthermore, there are requirements specifically applicable for zirconia-containing materials (see ISO 13356). In the material composition as defined in this document, additional additives are listed. Typical additives for alumina or zirconia ceramics are Mg, Y, Ce and others. Such additives can be useful in order to improve the mechanical properties and/or the chemical stability of the alumina-zirconia composite material. This document does not cover biocompatibility (see ISO 10993‑1). It is the responsibility of the manufacturer to evaluate the biocompatibility of the specific ceramic composite material which is produced within the framework of this document.
This document specifies the characteristics of, and corresponding test methods for bio-stable ceramic-bone-substitute material based on a zirconia-reinforced, high-purity alumina matrix composite for use as bone spacers, bone replacements and components in orthopaedic joint prostheses.
This document is intended for composite materials which are based on an alumina matrix, i.e. alumina as the dominating phase in the composite with a mass fraction of >60 %, similar to the material described in ISO 6474‑1, but extended by means of a certain amount of zirconia and other defined ingredients.
NOTE The required properties in this document differ from those in ISO 6474‑1 with respect to strength and fracture toughness. Furthermore, there are requirements specifically applicable for zirconia-containing materials (see ISO 13356).
In the material composition as defined in this document, additional additives are listed. Typical additives for alumina or zirconia ceramics are Mg, Y, Ce and others. Such additives can be useful in order to improve the mechanical properties and/or the chemical stability of the alumina-zirconia composite material.
This document does not cover biocompatibility (see ISO 10993‑1). It is the responsibility of the manufacturer to evaluate the biocompatibility of the specific ceramic composite material which is produced within the framework of this document.
Le présent document spécifie les caractéristiques et les méthodes d'essai correspondantes des matériaux céramiques biocompatibles et biostables servant de substitut à l'os, à base d'un matériau composite à matrice alumine de haute pureté renforcée par des grains de zircone, ces matériaux étant utilisés comme composants de prothèses articulaires en chirurgie orthopédique. Il traite des matériaux composites comprenant une matrice alumine (c'est-à-dire une phase dominante d'alumine dans le matériau composite avec une fraction massique > 60 %) similaire au matériau décrit dans la norme homologuée NF ISO 6474-1, additionné d'une certaine quantité de zircone et d'autres ingrédients définis.
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Classification
-
5 Préparation des éprouvettes
-
6 Méthodes d'essai
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ