ISO 10542-1:2012

ISO 10542-1:2012

October 2012
International standard Current

Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1 : requirements and test methods for all systems

This part of ISO 10542 specifies design and performance requirements and associated test methods for wheelchair tiedown and occupant-restraint systems (WTORS), as well as requirements for product marking and labelling and manufacturers' instructions and warnings to installers and consumers. It is applicable to all WTORS that use belt-type occupant restraints that are intended for occupied wheelchairs used as forward-facing seats by passengers and drivers of motor vehicles. This part of ISO 10542 is applicable to WTORS intended for use with all types of manual and powered wheelchairs, including three- and four-wheeled scooters, used by children and adults with a body mass equal to or greater than 22 kg. It is applicable also to WTORS designed for limited use with a particular make or model of wheelchair. This part of ISO 10542 is applicable primarily to complete WTORS, but portions can also be applied to components and subassemblies sold separately and for replacement parts.

See more
View the extract
Main informations

Collections

International ISO standards

Publication date

October 2012

Number of pages

68 p.

Reference

ISO 10542-1:2012

ICS Codes

11.180.10   Aids and adaptation for moving

Print number

1 - 18/10/2012
Sumary
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1 : requirements and test methods for all systems

This part of ISO 10542 specifies design and performance requirements and associated test methods for wheelchair tiedown and occupant-restraint systems (WTORS), as well as requirements for product marking and labelling and manufacturers' instructions and warnings to installers and consumers. It is applicable to all WTORS that use belt-type occupant restraints that are intended for occupied wheelchairs used as forward-facing seats by passengers and drivers of motor vehicles.

This part of ISO 10542 is applicable to WTORS intended for use with all types of manual and powered wheelchairs, including three- and four-wheeled scooters, used by children and adults with a body mass equal to or greater than 22 kg. It is applicable also to WTORS designed for limited use with a particular make or model of wheelchair.

This part of ISO 10542 is applicable primarily to complete WTORS, but portions can also be applied to components and subassemblies sold separately and for replacement parts.

Replaced standards (5)
ISO 10542-1:2001
July 2001
International standard Cancelled
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occcupant-restraint systems - Part 1 : requirements and test methods for all systems

ISO 10542-2:2001
July 2001
International standard Cancelled
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 2 : four-point strap-type tiedown systems

ISO 10542-3:2005
February 2005
International standard Cancelled
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 3 : Docking-type tiedown systems

<p>ISO 10542-3:2005 specifies design and performance requirements and recommendations, instructions and warnings for both installers and users, and product marking and labelling, for wheelchair tiedown and occupant-restraint systems (WTORS) that use a docking-type wheelchair tiedown. It specifies the universal docking interface geometry (UDIG) and a method of testing wheelchair movement. It is applicable to docking-type wheelchair tiedown devices intended for securing all types of manual and powered forward-facing wheelchairs, including scooters with three or more wheels, used by adult passengers and drivers of motor vehicles. Although ISO 10542-3 has been conceived primarily for use with complete WTORS, certain of its aspects can also be applied to components and subassemblies sold separately and for replacement parts.</p>

ISO 10542-4:2004
September 2004
International standard Cancelled
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 4 : clamp-type tiedown systems

ISO 10542-5:2004
April 2004
International standard Cancelled
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupent-resistraint systems - Part 5 : systems for specific wheelchairs

See more
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ