IEC 60695-11-4:2011
Collections
International IEC standards
Publication date
September 2011
Number of pages
41 p.
Reference
IEC 60695-11-4:2011
IEC 60695-11-4:2011
September 2011
International standard
Current
Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
IEC 60695-11-4:2011 provides a description of the apparatus required to produce a 50 W test flame and a description of a calibration procedure to check that the test flame produced meets given requirements. Guidance on confirmatory tests for test flames is given in IEC 60695-11-40. This first edition of IEC 60695-11-4 cancels and replaces the second edition of technical specification IEC/TS 60695-11-4 published in 2004. It constitutes a technical revision. The main changes with respect to the previous edition are the integration of minor editorial and technical changes throughout the text.This publication is to be read in conjunction with IEC 60695-11-4:2011.
Main informations
See more
See less
Sumary
Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
IEC 60695-11-4:2011 provides a description of the apparatus required to produce a 50 W test flame and a description of a calibration procedure to check that the test flame produced meets given requirements. Guidance on confirmatory tests for test flames is given in IEC 60695-11-40. This first edition of IEC 60695-11-4 cancels and replaces the second edition of technical specification IEC/TS 60695-11-4 published in 2004. It constitutes a technical revision. The main changes with respect to the previous edition are the integration of minor editorial and technical changes throughout the text.
This publication is to be read in conjunction with IEC 60695-11-4:2011.
IEC 60695-11-4:2011 provides a description of the apparatus required to produce a 50 W test flame and a description of a calibration procedure to check that the test flame produced meets given requirements. Guidance on confirmatory tests for test flames is given in IEC 60695-11-40. This first edition of IEC 60695-11-4 cancels and replaces the second edition of technical specification IEC/TS 60695-11-4 published in 2004. It constitutes a technical revision. The main changes with respect to the previous edition are the integration of minor editorial and technical changes throughout the text.
This publication is to be read in conjunction with IEC 60695-11-4:2011.
See more
Voir moins
Replaced standards
(1)
IEC TS 60695-11-4:2004
April 2004
Technical specification
Cancelled
Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame. The approximate overall height is 20 mm. The main changes with respect to the previous edition are described below: - The introduction has been revised, - Test methods B and C have been withdrawn. Test method A has been retained with its original letter designation, - Normative reference ISO 1337 has been withdrawn without a replacement by ISO/TC 26. The callout Cu-ETP UNS 11000 is the replacement for all references to ISO 1337. It is taken from ASTM B187-00 and describes high conductivity electrolytic copper, - A new Annex H has been added which provides access to equipment manufacturers and suppliers, - Alignment with other publications in the IEC 60695-11 series has been made, where appropriate Has the status of a basic safety publication in accordance with IEC Guide 104.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ