IEC 62896:2024
Collections
International IEC standards
Publication date
May 2024
Number of pages
42 p.
Reference
IEC 62896:2024
IEC 62896:2024
May 2024
International standard
Current
Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance criteria
IEC 62896:2024 applies to hybrid insulators for AC and DC applications greater than 1 000 V AC and 1 500 V DC consisting of a load-bearing insulating solid or hollow core consisting of ceramic or glass, a housing (defined geometry, outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core.Hybrid insulators covered by this document are intended for use as suspension/tension long rod and cap and pin type insulators, line post insulators, station post insulators and hollow core insulators for apparatus.The object of this document is to:- define the terms used;- prescribe test methods;- prescribe acceptance criteriaThis document does not include requirements dealing with the choice of insulators for specific operating conditions. This first edition cancels and replaces the IEC TS 62896 published in 2015. This edition includes the following significant technical changes with respect to the previous edition:- modifications of terms and definitions;- modifications of tests procedures included in IEC TR 62039 and IEC 62217 (Hydrophobicity transfer test);- harmonization of Table 1 (Tests to be carried out after design and type changes) with other product standards and IEC 62217.
Main informations
See more
See less
Sumary
Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance criteria
IEC 62896:2024 applies to hybrid insulators for AC and DC applications greater than 1 000 V AC and 1 500 V DC consisting of a load-bearing insulating solid or hollow core consisting of ceramic or glass, a housing (defined geometry, outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core.
Hybrid insulators covered by this document are intended for use as suspension/tension long rod and cap and pin type insulators, line post insulators, station post insulators and hollow core insulators for apparatus.
The object of this document is to:
- define the terms used;
- prescribe test methods;
- prescribe acceptance criteria
This document does not include requirements dealing with the choice of insulators for specific operating conditions. This first edition cancels and replaces the IEC TS 62896 published in 2015. This edition includes the following significant technical changes with respect to the previous edition:
- modifications of terms and definitions;
- modifications of tests procedures included in IEC TR 62039 and IEC 62217 (Hydrophobicity transfer test);
- harmonization of Table 1 (Tests to be carried out after design and type changes) with other product standards and IEC 62217.
IEC 62896:2024 applies to hybrid insulators for AC and DC applications greater than 1 000 V AC and 1 500 V DC consisting of a load-bearing insulating solid or hollow core consisting of ceramic or glass, a housing (defined geometry, outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core.
Hybrid insulators covered by this document are intended for use as suspension/tension long rod and cap and pin type insulators, line post insulators, station post insulators and hollow core insulators for apparatus.
The object of this document is to:
- define the terms used;
- prescribe test methods;
- prescribe acceptance criteria
This document does not include requirements dealing with the choice of insulators for specific operating conditions. This first edition cancels and replaces the IEC TS 62896 published in 2015. This edition includes the following significant technical changes with respect to the previous edition:
- modifications of terms and definitions;
- modifications of tests procedures included in IEC TR 62039 and IEC 62217 (Hydrophobicity transfer test);
- harmonization of Table 1 (Tests to be carried out after design and type changes) with other product standards and IEC 62217.
See more
Voir moins
Replaced standards
(1)
IEC TS 62896:2015
November 2015
Technical specification
Cancelled
Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
IEC TS 62896:2015(E) applies to hybrid insulators for a.c. and d.c. applications consisting of a load-bearing insulating solid or hollow core consisting of ceramic or glass, a housing (defined geometry, outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core. Hybrid insulators covered by this technical specification are intended for use as suspension/tension line insulators, line post insulators, station post insulators and hollow core insulators for apparatus. The object of this technical specification is to: - define the terms used; - prescribe test methods; - prescribe acceptance criteria. Silicone or other functional coatings (CIGRE Technical Brochure No. 478, Appendix B), booster sheds, shed extenders and rain deflectors are not within the scope of this technical specification. This technical specification does not include requirements dealing with the choice of insulators for specific operating conditions.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ