ISO 1853:2018
Conducting and dissipative rubbers - Vulcanized or thermoplastic - Measurement of resistivity
This document specifies the requirements for the laboratory testing of the volume resistivity of specially prepared test pieces of vulcanized or thermoplastic rubber compounds rendered conducting or dissipative by the inclusion of carbon black or ionizable materials. The tests are suitable for materials with a resistivity of less than about 108 Ω⋅m. Method 1 is the preferred method when test pieces with bonded electrodes are not available. Method 2 is the preferred method when test pieces are moulded with the inclusion of bonded electrodes. Method 3 is another method that can be used if the apparatus for method 1 or 2 is not available, but it has lower accuracy. If a reference to this document is made without specifying the method, method 1 is used.
This document specifies the requirements for the laboratory testing of the volume resistivity of specially prepared test pieces of vulcanized or thermoplastic rubber compounds rendered conducting or dissipative by the inclusion of carbon black or ionizable materials. The tests are suitable for materials with a resistivity of less than about 108 Ω⋅m.
Method 1 is the preferred method when test pieces with bonded electrodes are not available.
Method 2 is the preferred method when test pieces are moulded with the inclusion of bonded electrodes.
Method 3 is another method that can be used if the apparatus for method 1 or 2 is not available, but it has lower accuracy.
If a reference to this document is made without specifying the method, method 1 is used.
<p>ISO 1853:2011 specifies the requirements for the laboratory testing of the volume resistivity of specially prepared test pieces of vulcanized or thermoplastic rubber compounds rendered conducting or dissipative by the inclusion of carbon black or ionizable materials. The tests are suitable for materials with a resistivity of less than about 10<sup>8</sup> ohm metres.</p> <p>Method 1 is the preferred method when test pieces with bonded electrodes are not available.</p> <p>Method 2 is the preferred method when test pieces are moulded with the inclusion of bonded electrodes.</p> <p>Method 3 may be used if methods 1 and 2 are not suitable, but it has lower accuracy.</p>
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ