NF EN ISO 11130

NF EN ISO 11130

March 2018
Standard Current

Corrosion of metals and alloys - Alternate immersion test in salt solution

ISO 11130:2017 specifies a method for assessing the corrosion resistance of metals by an alternate immersion test in salt solution, with or without applied stress. The test is particularly suitable for quality control during the manufacture of metals including aluminium alloys and ferrous materials, and also for assessment purposes during alloy development. Depending upon the chemical composition of the test solution, the test can be used to simulate the corrosive effects of marine splash zones, de-icing fluids and acid salt environments. The term "metal" as used in this document includes metallic materials with or without corrosion protection. ISO 11130:2017 is applicable to - metals and their alloys, - certain metallic coatings (anodic and cathodic with respect to the substrate), - certain conversion coatings, - certain anodic oxide coating, and - organic coatings on metals.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2018

Number of pages

22 p.

Reference

NF EN ISO 11130

ICS Codes

77.060   Corrosion of metals

Classification index

A05-121

Print number

1

International kinship

ISO 11130:2017

European kinship

EN ISO 11130:2018
Sumary
Corrosion of metals and alloys - Alternate immersion test in salt solution

ISO 11130:2017 specifies a method for assessing the corrosion resistance of metals by an alternate immersion test in salt solution, with or without applied stress.

The test is particularly suitable for quality control during the manufacture of metals including aluminium alloys and ferrous materials, and also for assessment purposes during alloy development.

Depending upon the chemical composition of the test solution, the test can be used to simulate the corrosive effects of marine splash zones, de-icing fluids and acid salt environments.

The term "metal" as used in this document includes metallic materials with or without corrosion protection.

ISO 11130:2017 is applicable to

- metals and their alloys,

- certain metallic coatings (anodic and cathodic with respect to the substrate),

- certain conversion coatings,

- certain anodic oxide coating, and

- organic coatings on metals.

Replaced standards (1)
NF EN ISO 11130
August 2010
Standard Cancelled
Corrosion of metals and alloys - Alternate immersion test in salt solution

Le présent document spécifie une méthode d'évaluation de la résistance à la corrosion des métaux par un essai en immersions alternées en solution saline, avec ou sans application d'une contrainte. Cet essai est particulièrement adapté comme essai de contrôle qualité effectué au cours de la production des métaux, y compris les alliages d'aluminium et les matériaux ferreux, ainsi que pour des besoins d'évaluation durant la mise au point d'alliages. Selon la composition chimique de la solution d'essai, l'essai peut être utilisé pour simuler les effets corrosifs des projections d'eau de mer, des sels de déverglaçage ou des environnements salins acides. Le terme "métal" est utilisé dans le présent document pour désigner tous les matériaux métalliques avec ou sans protection contre la corrosion. L'essai en immersions alternées s'applique aux métaux et à leurs alliages, à certains revêtements métalliques, à certaines couches de conversion, à certains revêtements formés par oxydation anodique, aux revêtements organiques sur métaux. Le présent document n'est pas applicable aux aciers inoxydables.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Solution d'essai
  • 6 Appareillage
  • 7 Éprouvettes
  • 8 Mode opératoire
  • 9 Nettoyage des éprouvettes
  • 10 Évaluation des résultats
  • 11 Rapport d'essai
  • Annexe (informative) Solutions d'essai proposées
  • Annexe B (informative) Appareillage approprié aux essais en immersions alternéesen solution saline
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ