NF EN ISO 23936-1

NF EN ISO 23936-1

February 2010
Standard Cancelled

Petroleum, petrochimical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1 : thermoplastics

ISO 23936 as a whole presents general principles and gives requirements and recommendations for the selection and qualification, and gives guidance for the quality assurance, of non-metallic materials for service in equipment used in oil and gas production environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion failures of the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations. ISO 23936-1:2009 addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with production and chemical treatment. Interaction with sunlight is included; however, ionizing radiation is excluded from the scope of ISO 23936-1:2009. ISO 23936-1:2009 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2010

Number of pages

37 p.

Reference

NF EN ISO 23936-1

ICS Codes

75.180.01   Equipment for petroleum and natural gas industries in general

Classification index

M87-232-1

Print number

1 - 01/02/2010

International kinship

ISO 23936-1:2009

European kinship

EN ISO 23936-1:2009
Sumary
Petroleum, petrochimical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1 : thermoplastics

ISO 23936 as a whole presents general principles and gives requirements and recommendations for the selection and qualification, and gives guidance for the quality assurance, of non-metallic materials for service in equipment used in oil and gas production environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion failures of the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations.

ISO 23936-1:2009 addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with production and chemical treatment. Interaction with sunlight is included; however, ionizing radiation is excluded from the scope of ISO 23936-1:2009.

ISO 23936-1:2009 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers.

Standard replaced by (1)
NF EN ISO 23936-1
September 2022
Standard Current
Oil and gas industries including lower carbon energy - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics

This document gives general principles, specifies requirements and gives recommendations for the assessment of the stability of non-metallic materials for service in equipment used in oil and gas exploration and production environments. This information aids in material selection. It can be applied to help avoid costly degradation failures of the equipment itself, which could pose a risk to the health and safety of the public and personnel or the environment. This document also provides guidance for quality assurance. It supplements but does not replace, the material requirements given in the appropriate design codes, standards or regulations. This document addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with chemical treatment. Interaction with sunlight and ionizing radiation are excluded from the scope of this document. This document is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers. Blistering by rapid gas decompression is not included in the scope of this document. This document applies to the assessment of the stability of non-metallic materials in simulated hydrocarbon production conditions to aid the selection of materials for equipment designed and constructed using conventional design criteria. Designs utilizing other criteria are excluded from its scope.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions et termes abrégés
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Termes abrégés
    4
  • 4 Exigences fonctionnelles
    5
  • 4.1 Généralités
    5
  • 4.2 Conduites, tuyauterie et chemisages
    5
  • 4.3 Joints, rondelles et joints d'étanchéité
    10
  • 4.4 Encapsulations, isolations électriques, conduites d'injection
    12
  • 5 Exigences relatives aux informations techniques
    13
  • 6 Exigences relatives aux fabricants
    14
  • 6.1 Exigences générales
    14
  • 6.2 Fabricant de matières premières
    14
  • 6.3 Fabricant de composants
    14
  • 6.4 Validité de la qualification
    14
  • 7 Qualification de matières thermoplastiques
    15
  • 7.1 Généralités
    15
  • 7.2 Exigences relatives aux essais de résistance chimique
    15
  • Annexe A (informative) Propriétés chimiques caractéristiques de matières thermoplastiques couramment utilisées dans les milieux rencontrés en production de pétrole et de gaz
    17
  • Annexe B (normative) Exigences relatives aux milieux, aux conditions, aux équipements, aux modes opératoires et aux rapports des essais
    21
  • Bibliographie
    27
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ