NF EN ISO 28927-13

NF EN ISO 28927-13

March 2022
Standard Current

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13 : fastener driving tools

This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load. This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins. This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3). This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance. NOTE       Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Sécurité, QSE, Gestion des risques et SST

Publication date

March 2022

Number of pages

31 p.

Reference

NF EN ISO 28927-13

ICS Codes

13.160   Vibration and shock with respect to human beings
25.140.10   Pneumatic tools

Classification index

E90-321-13

Print number

1

International kinship

ISO 28927-13:2022

European kinship

EN ISO 28927-13:2022
Sumary
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13 : fastener driving tools

This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load.

This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins.

This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).

This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.

NOTE       Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.

Replaced standards (1)
XP CEN ISO/TS 8662-11
December 2004
Standard Cancelled
Hand-held portable power tools - Measurement of vibrations at the handle - Part 11 : fastener driving tools

Le présent document s'inscrit dans le cadre d'une série de documents sur le mesurage des vibrations au niveau des poignées des machines portatives. Il concerne les machines à enfoncer les fixations.

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles
  • 5 Normes de base et codes d'essais de vibration
  • 6 Description de la famille de machines
  • 7 Caractérisation des vibrations
  • 8 Exigences pour l'appareillage
  • 9 Conditions d'essai et de fonctionnement de la machine
  • 10 Mode opératoire de mesurage et validité
  • 11 Rapport d'essai
  • Annexe B (normative) Détermination de l'incertitude
  • Annexe A (informative) Modèle de rapport d'essai pour les émissions de vibrations des machines à enfoncer les fixations
  • Annexe C (informative) Informations complémentaires pour les machines à actionnement séquentiel complet
  • Annexe ZA (informative) Relation entre la présente Norme européenne et les exigences essentielles concernées de la Directive 2006/42/CE
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ