NF EN ISO 8254-2
Paper and board - Measurement of specular gloss - Part 2 : 75. gloss with a parallel beam, DIN method
ISO 8254-2:2003 specifies a photometric test method for the assessment of visual gloss by means of a reflectometer value measured at an angle of 75 degrees. It is applicable to plane paper and board surfaces of low gloss, commonly called matt papers and boards having reflectance values, measured according to ISO 8254-2:2003, between 0 and approximately 20. Materials containing optical brightening agents may be measured.
ISO 8254-2:2003 specifies a photometric test method for the assessment of visual gloss by means of a reflectometer value measured at an angle of 75 degrees. It is applicable to plane paper and board surfaces of low gloss, commonly called matt papers and boards having reflectance values, measured according to ISO 8254-2:2003, between 0 and approximately 20. Materials containing optical brightening agents may be measured.
<p>ISO 8254-2:2016 specifies a photometric test method for the assessment of visual gloss by means of a reflectometer value measured at an angle of 75°. It is applicable to plane paper and board surfaces of gloss levels below 65, measured according to ISO 8254-2:2016. It should be the preferred method for paper and board surfaces of gloss levels below 20, measured according to ISO 8254-2:2016. Materials containing optical brightening agents may be measured.</p>
- Avant-propos3
- Introduction4
-
1Domaine d'application 4
-
2Références normatives 4
-
3Termes et définitions 5
-
4Principe 5
-
5Équipement 5
-
5.1Réflectomètre 5
-
5.2Étalons de brillant 5
-
6Échantillonnage 7
-
7Préparation des éprouvettes 7
-
7.1Conditionnement 7
-
7.2Préparation 7
-
8Mode opératoire 7
-
8.1Étalonnage 7
-
8.2Détermination de la valeur réflectométrique 8
-
8.3Calculs et expression des résultats 8
-
9Rapport d'essai 8
- Annexe A (normative) Description de l'appareil9
- Annexe B (informative) Organismes désignés pour l'étalonnage des étalons de brillant intermédiaires13
- Bibliographie14
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ