NF EN ISO 9988-1
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1 : designation system and basis for specifications
ISO 9988-1:2004 establishes a system of designation for polyoxymethylene (POM) thermoplastic materials, which may be used as the basis for specifications. The types of polyoxymethylene plastic are differentiated from each other by a classification system based on appropriate levels of the following designatory properties: melt mass-flow rate or melt volume-flow rate,tensile modulus, and on information about basic polymer parameters, intended application, method of processing, important properties, additives, colorants, fillers and reinforcing materials. This part of ISO 9988 is applicable to all polyoxymethylene homopolymers and to copolymers of polyoxymethylene and blends of polymers containing polyoxymethylene. It applies to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified and modified by colorants, additives, fillers, etc.
ISO 9988-1:2004 establishes a system of designation for polyoxymethylene (POM) thermoplastic materials, which may be used as the basis for specifications.
The types of polyoxymethylene plastic are differentiated from each other by a classification system based on appropriate levels of the following designatory properties:
- melt mass-flow rate or melt volume-flow rate,
- tensile modulus,
and on information about basic polymer parameters, intended application, method of processing, important properties, additives, colorants, fillers and reinforcing materials.
This part of ISO 9988 is applicable to all polyoxymethylene homopolymers and to copolymers of polyoxymethylene and blends of polymers containing polyoxymethylene.
It applies to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified and modified by colorants, additives, fillers, etc.
<p>ISO 29988-1:2018 establishes a system of designation for polyoxymethylene (POM) thermoplastic materials, which can be used as the basis for specifications.</p> <p>The types of polyoxymethylene (POM) materials are differentiated from each other by a classification system based on appropriate levels of the following designatory properties:</p> <p>a) melt mass-flow rate or melt volume-flow rate;</p> <p>b) tensile modulus,</p> <p>and on information about basic polymer parameters, intended application, method of processing, important properties, additives, colorants, fillers and reinforcing materials.</p> <p>ISO 29988-1:2018 is applicable to all polyoxymethylene homopolymers and to copolymers of polyoxymethylene and blends of polymers containing polyoxymethylene. </p> <p>ISO 29988-1:2018 applies to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified and modified by colorants, additives, fillers, etc.</p> <p>ISO 29988-1:2018 is not intended to imply that materials having the same designation necessarily give the same performance. This document does not provide engineering data, performance data or data on processing conditions which can be required to specify materials for particular end-use applications. If such additional properties are required, they are intended to be determined in accordance with the test methods specified in the relevant International Standards.</p>
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ