ISO 10766:2006 specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Figure 1, for applications in the following range of dimensions: for cylinders with bores of 16 mm to 500 mm, inclusive;for rods with diameters of 12 mm to 360 mm, inclusive. ISO 10766:2006 does not give details of cut bearing ring design, because the manner of construction of cut bearing rings varies with each manufacturer.The design material of cut bearing rings and any incorporated anti-extrusion component are determined by conditions such as temperature and pressure.
La présente norme est destinée à faciliter l'interchangeabilité des dispositifs de guidage à section rectangulaire pour tiges de piston et pistons de vérins hydrauliques. Pour cela, elle fixe les dimensions et les tolérances des logements auxquelles doivent se conformer les fabricants de joints et de dispositifs de guidage.
<p>ISO 10766:2014 specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Clause 5, for applications in the following range of dimensions:</p> <ul> <li>for cylinders with bores of 16 mm to 500 mm, inclusive;</li> <li>for rods with diameters of 12 mm to 450 mm, inclusive.</li> </ul> <p>ISO 10766:2014 does not give details of cut bearing ring design, because the manner of construction of cut bearing rings varies with each manufacturer.</p>
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ