NF ISO 12164-3

NF ISO 12164-3

March 2015
Standard Cancelled

Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools

ISO 12164-3:2014 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is specified.Specified is the shank of type T. It incorporates a grooved flange to enable automatic tool exchange. The tools can also be exchanged manually via a hole in the shank taper.The torque is transmitted at the tail end of the shank through keys as well as friction.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2015

Number of pages

16 p.

Reference

NF ISO 12164-3

ICS Codes

25.060.20   Dividing and tool-workpiece holding devices

Classification index

E62-507-3

Print number

1

International kinship

ISO 16164-3:2014
Sumary
Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools

ISO 12164-3:2014 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is specified.

Specified is the shank of type T. It incorporates a grooved flange to enable automatic tool exchange. The tools can also be exchanged manually via a hole in the shank taper.

The torque is transmitted at the tail end of the shank through keys as well as friction.

Replaced standards (1)
NF ISO 12164-3
January 2009
Standard Cancelled
Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools

ISO 12164-3:2008 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is given. ISO 12164-3:2008 specifies the shank of type T, which incorporates a grooved flange to enable automatic tool exchange. The tools may also be exchanged manually via a hole in the shank taper. The torque is transmitted at the tail end of the shank through keys as well as friction.

Standard replaced by (1)
NF ISO 12164-3
November 2023
Standard Current
Hollow taper interface with flange contact surface - Part 3 : shanks of types T, TA and U

This document specifies the dimensions for hollow taper shanks with flange contact surface (HSK). These shanks are the male part of the interface to the machine tools (e.g. milling/drilling, turning and grinding machines). This document specifies three types of shanks: —     type T has a peripherally grooved flange for automatic tool change in turning machines with a gripper for HSK type T; —     type TA has a peripherally grooved flange for automatic tool change in milling machines, enabled (designed) for turning, with a gripper for HSK type A or AB; —     type U has no peripheral groove flange and is designed for manual tool change in turning machines. HSK types T and TA can also be changed manually via radial access bore holes in the hollow shank taper.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Dimensions
    1
  • 4 Conception
    6
  • 5 Désignation
    6
  • Annexe A (normative) Annexe A Détails de la gorge
    7
  • Annexe B (informative) Annexe B Recommandations pour l'utilisation et l'application
    9
  • Bibliographie
    10
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ