ASTM D8099/D8099M-17(2023)

ASTM D8099/D8099M-17(2023)

January 2023
Standard Current

Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)

This specification establishes the material and manufacturing requirements for water-based asphalt emulsion (mineral colloid or chemically stabilized type) pavement sealers suitable for use as a weather-protective coating over bituminous pavements, such as roadways, driveways, and parking areas. The base asphalt emulsion shall be made using binders prepared from crude petroleum; the mineral filler (when used), shall consist of finely ground clay, silica, limestone, slate, basalt, slag, or other inert inorganic filler materials; and the aggregate shall be either a natural or manufactured angular aggregate composed of clean, hard, durable particles free of clay or other objectionable material. The aggregate to be used shall follow the manufacturer's recommendations; however, 100% of the aggregate shall pass a 2.38 mm [No. 8] mesh-sieve at all times. Aggregate may either be added at the point of manufacture, post-added at the job site, or both. The use of an additive is optional and shall be approved by the asphalt emulsion pavement sealer manufacturer.This specification also covers the physical requirements, sampling, inspection, and packaging and package marking for asphalt emulsion pavement sealers (mineral colloid or chemically stabilized type).

See more
Important information
To view this document, the FileOpen plug-in must be installed.
At the publisher's request, the document is available for consultation only in PDF format with single-user use and printing is not permitted. If you are not the intended user of this document, do not download it to your computer, otherwise the intended user will not be able to open it.
If you have any problems, please click here to contact customer support
If you haven't already done so, download the plug-in HERE
Consult HERE our prerequisites.
Additional informations

1.1 This specification covers water-based asphalt emulsion (mineral colloid or chemically stabilized type) pavement sealer suitable for use as a weather-protective coating over bituminous pavements, such as roadways, parking areas, and driveways.

Note 1: Application shall be made in accordance with a forthcoming ASTM standard on the application of asphalt emulsion pavement sealer.

1.2 The values stated in SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


Main informations

Collections

ASTM american standards

Publication date

January 2023

Number of pages

2 p.

Reference

ASTM D8099/D8099M-17(2023)

Classification index

D8099_D8099M-17R23
Sumary
Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)

This specification establishes the material and manufacturing requirements for water-based asphalt emulsion (mineral colloid or chemically stabilized type) pavement sealers suitable for use as a weather-protective coating over bituminous pavements, such as roadways, driveways, and parking areas. The base asphalt emulsion shall be made using binders prepared from crude petroleum; the mineral filler (when used), shall consist of finely ground clay, silica, limestone, slate, basalt, slag, or other inert inorganic filler materials; and the aggregate shall be either a natural or manufactured angular aggregate composed of clean, hard, durable particles free of clay or other objectionable material. The aggregate to be used shall follow the manufacturer's recommendations; however, 100% of the aggregate shall pass a 2.38 mm [No. 8] mesh-sieve at all times. Aggregate may either be added at the point of manufacture, post-added at the job site, or both. The use of an additive is optional and shall be approved by the asphalt emulsion pavement sealer manufacturer.

This specification also covers the physical requirements, sampling, inspection, and packaging and package marking for asphalt emulsion pavement sealers (mineral colloid or chemically stabilized type).

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ