FD ISO/TR 10064-6

FD ISO/TR 10064-6

October 2010
Published document Current

Code of inspection practice - Part 6 : bevel gear measurement methods

ISO/TR 10064-6:2009 provides information on measuring methods and practices of unassembled bevel and hypoid gears and gear pairs. It includes methods and practices, which permit the manufacturer and purchaser to conduct measuring procedures which are accurate and repeatable to a degree compatible with the specified tolerance grade of ISO 17485.Tolerances are given in Clause 5 of ISO 17485:2006, for calculating the maximum values allowed by the specific tolerance grade. Required and optional measuring methods are provided in Clause 6 of ISO 17485:2006.ISO/TR 10064-6:2009 applies to bevel gear components as defined in ISO 17485. It does not apply to enclosed gear unit assemblies, including speed reducers or increasers, gear motors, shaft mounted reducers, high speed units, or other enclosed gear units which are manufactured for a given power, speed, ratio or application.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2010

Number of pages

44 p.

Reference

FD ISO/TR 10064-6

ICS Codes

21.200   Gears

Classification index

E23-008-6

Print number

1 - 26/10/2010

International kinship

ISO/TR 10064-6:2009
Sumary
Code of inspection practice - Part 6 : bevel gear measurement methods

ISO/TR 10064-6:2009 provides information on measuring methods and practices of unassembled bevel and hypoid gears and gear pairs. It includes methods and practices, which permit the manufacturer and purchaser to conduct measuring procedures which are accurate and repeatable to a degree compatible with the specified tolerance grade of ISO 17485.

Tolerances are given in Clause 5 of ISO 17485:2006, for calculating the maximum values allowed by the specific tolerance grade. Required and optional measuring methods are provided in Clause 6 of ISO 17485:2006.

ISO/TR 10064-6:2009 applies to bevel gear components as defined in ISO 17485. It does not apply to enclosed gear unit assemblies, including speed reducers or increasers, gear motors, shaft mounted reducers, high speed units, or other enclosed gear units which are manufactured for a given power, speed, ratio or application.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références
    1
  • 3 Symboles, termes et définitions
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Symboles
    3
  • 4 Mesurage des engrenages coniques
    4
  • 4.1 Considérations générales relatives à la fabrication et à l'achat
    4
  • 4.2 Documentation de fabrication
    5
  • 4.3 Contrôle du mode opératoire
    5
  • 4.4 Méthodes de mesure
    5
  • 4.5 Considérations supplémentaires
    6
  • 4.6 Critères d'acceptation
    7
  • 5 Méthodes et pratiques de mesure
    7
  • 5.1 Lignes directrices pour le mesurage des caractéristiques de l'engrenage
    7
  • 5.2 Pratiques de mesurage
    8
  • 5.3 Mesurage des écarts de pas
    10
  • 5.4 Mesurage du faux-rond des engrenages coniques
    17
  • 5.5 Mesurage de la forme de flanc
    19
  • 5.6 Contrôle de la marque de portée de dents
    25
  • 5.7 Inspection composée d'engrènement sur un flanc
    32
  • 5.8 Essai composé d'engrènement sur deux flancs
    33
  • 5.9 Mesurage de l'épaisseur de la dent
    36
  • 5.10 Applications en fabrication
    39
  • 6 Tolérances de surfaces de référence recommandées
    39
  • Bibliographie
    40
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ