IEC 60034-14:1996
Collections
International IEC standards
Publication date
November 1996
Number of pages
25 p.
Reference
IEC 60034-14:1996
Print number
2
IEC 60034-14:1996
November 1996
International standard
Cancelled
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
Applies to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated power up to 50 MW, at nominal speeds from 600 rev/min up to and including 3 600 rev/min. For vertical machines, applies to those machines which are measured in a state of free suspension. This standard is not applicable to machines mounted in-situ
Main informations
See more
See less
Sumary
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
Applies to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated power up to 50 MW, at nominal speeds from 600 rev/min up to and including 3 600 rev/min. For vertical machines, applies to those machines which are measured in a state of free suspension. This standard is not applicable to machines mounted in-situ
Applies to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated power up to 50 MW, at nominal speeds from 600 rev/min up to and including 3 600 rev/min. For vertical machines, applies to those machines which are measured in a state of free suspension. This standard is not applicable to machines mounted in-situ
See more
Voir moins
Replaced standards
(1)
IEC 60034-14:1982
January 1982
International standard
Cancelled
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of the vibration severity
Applies to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated power up to 50 MW, at nominal speeds from 600 rev/min up to and including 3 600 rev/min. For vertical machines, applies to those machines which are measured in a state of free suspension, and excludes those exceeding a shaft height of 400 mm. The contents of the corrigendum of August 1984 have been included in this copy.
Standard replaced by
(1)
IEC 60034-14:2003
November 2003
International standard
Cancelled
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
Specifies the factory acceptance vibration test procedures and vibration limits for certain electrical machines under specified conditions, when uncoupled from any load or prime mover. Is applicable to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated output up to 50 MW, at operational speeds up to 15 000 per minute.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ