IEC 60317-0-1:2008

March 2008

International standard Cancelled

Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire

This part of IEC 60317 specifies general requirements of enamelled round copper winding wires with or without bonding layer. The main changes with respect to the previous edition are:- addition of Grade 3 minimum insulation increases and maximum overall diameters for wires up to 0,071 mm nominal conductor diameter in Tables 1 and A.1;- revisions to minimum increase in bonding layer for wires up to 0,100 mm nominal conductor diameter in Tables 2 and A.2;- addition of Grade 3 dielectric breakdown requirements for wires up to 0,071 mm nominal conductor diameter; and- new pin hole test requirement for Grade 3 polyurethane wires.This standard is to be read in conjunction with the IEC 60851 series. The clause numbers used in this part of IEC 60317 are identical with the respective test numbers of IEC 60851.

Main informations

Collections

International IEC standards

Publication date

March 2008

Number of pages

56 p.

Reference

IEC 60317-0-1:2008

Print number

3 - 24/04/2008

Sumary

Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire

This part of IEC 60317 specifies general requirements of enamelled round copper winding wires with or without bonding layer. The main changes with respect to the previous edition are:
- addition of Grade 3 minimum insulation increases and maximum overall diameters for wires up to 0,071 mm nominal conductor diameter in Tables 1 and A.1;
- revisions to minimum increase in bonding layer for wires up to 0,100 mm nominal conductor diameter in Tables 2 and A.2;
- addition of Grade 3 dielectric breakdown requirements for wires up to 0,071 mm nominal conductor diameter; and
- new pin hole test requirement for Grade 3 polyurethane wires.
This standard is to be read in conjunction with the IEC 60851 series. The clause numbers used in this part of IEC 60317 are identical with the respective test numbers of IEC 60851.

Standard replaced by (1)

IEC 60317-0-1:2013

October 2013

International standard Current

Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire

IEC 60317-0-1:2013 specifies general requirements of enamelled round copper winding wires with or without bonding layer. The range of nominal conductor diameters is given in the relevant specification sheet. This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - revision to the definition of nominal conductor dimension; - new subclause containing general notes on winding wire, formerly a part of the scope; - revision to elongation requirements in Table 4; - revisions to Clause 13, Breakdown voltage, to include new requirements for intermediate wire diameters; - revision to continuity of insulation requirements in Table 13; - revision to the introduction of Annex A; - revision to B.2 of Annex B; - revision to Table C.1 of Annex C. Keywords: requirements of enamelled round copper winding wires This publication is to be read in conjunction with the IEC 60851 series.

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ