IEC 60335-2-80:2024
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
IEC 60335-2-80:2024 deals with the safety of electric fans for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.Examples of the types of fans that this standard is applicable to are- ceiling fans;- duct fans;- infant fans;- partition fans;- pedestal fans;- table fans.This standard also applies to separate controls supplied with fans.Infant fans are also tested to the applicable requirements of the ISO 8124 series, since it covers hazards other than those arising from the use of electricity such as toxicological hazards.Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended for use in shops, in light industry and on farms, are within the scope of this standard.As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:- persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;- children playing with the appliance.Attention is drawn to the fact that- for appliances intended to be used in vehicles or on-board ships or aircraft, additional requirements can be necessary;- in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.This standard does not apply to- appliances intended exclusively for industrial purposes;- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);- fans incorporated in other appliances.This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:a) alignment with IEC 60335-1:2020;b) conversion of some notes to normative text (Clause 1);c) introduction of requirements for infant fans (7.12, 7.12.1, 8.1.1, 11.8, 20.2, 21.103, 22.44, 22.54, 22.102, B.22.3, B.22.4);d) introduction of the use of test probe 19 (8.1.1, 20.2, B.22.3, B.22.4);e) introduction of surface temperature limits (Clause 11);f) clarification of testing of fans for use in a tropical climate (5.7, Annex P 11.8);g) clarification of requirements for remote operation of fans (22.40, 22.49, 22.51).This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
IEC 60335-2-80:2024 deals with the safety of electric fans for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.
Examples of the types of fans that this standard is applicable to are
- ceiling fans;
- duct fans;
- infant fans;
- partition fans;
- pedestal fans;
- table fans.
This standard also applies to separate controls supplied with fans.
Infant fans are also tested to the applicable requirements of the ISO 8124 series, since it covers hazards other than those arising from the use of electricity such as toxicological hazards.
Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended for use in shops, in light industry and on farms, are within the scope of this standard.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
- persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
- children playing with the appliance.
Attention is drawn to the fact that
- for appliances intended to be used in vehicles or on-board ships or aircraft, additional requirements can be necessary;
- in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.
This standard does not apply to
- appliances intended exclusively for industrial purposes;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
- fans incorporated in other appliances.
This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 60335-1:2020;
b) conversion of some notes to normative text (Clause 1);
c) introduction of requirements for infant fans (7.12, 7.12.1, 8.1.1, 11.8, 20.2, 21.103, 22.44, 22.54, 22.102, B.22.3, B.22.4);
d) introduction of the use of test probe 19 (8.1.1, 20.2, B.22.3, B.22.4);
e) introduction of surface temperature limits (Clause 11);
f) clarification of testing of fans for use in a tropical climate (5.7, Annex P 11.8);
g) clarification of requirements for remote operation of fans (22.40, 22.49, 22.51).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
IEC 60335-2-80:2015 deals with the safety of electric fans for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of fans that are within the scope of this standard are ceiling fans; duct fans; partition fans; pedestal fans and table fans. This standard also applies to separate controls supplied with fans. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction. It also does not take into account children playing with the appliance. It was established on the basis of the fifth edition (2010) of that standard. This third edition cancels and replaces the second edition published in 2002, its Amendment 1 (2007) and its Amendment 2 (2011). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-80 are as follows (minor changes are not listed): - added definition for ceiling fan suspension system (3.102); - added instructions for ceiling fan maintenance (7.12); - added instructions for ceiling fan installation (7.12.1); - added entrapment assessment criteria for table and pedestal fan with a fan head that oscillates in the up-down direction (20.102); - added requirements for insulation of pre-installed internal wiring used to supply attached luminaires (22.101); - added suspension system failure protection requirements for ceiling fans (22.102); - added motor brush wear requirements (27.3). The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Fans, Duct fans, Pedestal fans, Ceiling fans, Partition fans, Table fans
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ