IEC 60335-2-98/A1:2004

IEC 60335-2-98/A1:2004

November 2004
International standard Cancelled

Amendment 1 to the publication IEC 60335-2-98:2002

Specifies standardized nominal cross-section areas from 0.5 mm2 to 2 000 mm2, numbers and diameters of wires and resistance values of conductors in electric cables and flexible cords. Classifies conductors for: 1.Cables for fixed installations -Class 1, solid conductors; -Class 2, stranded conductors. 2.Flexible copper conductors -Class 5, -Class 6 (more flexible than Class 5). Includes table of temperature correction factors kt for conductor resistance to correct the measured resistance at t °C to 20°C. Does not apply to conductors for telecommunication purposes. Applies to conductors of special design only when stated in the specification for the type of cable. Conductors of special design are, for example. conductors for pressure cables, conductors in extra-flexible welding cables or in special types of flexible cables for having the cores twisted together with unusually short lays. This publication supersedes IEC 60180 (1965). Note: -In this edition, the number of classes of conductors has been reduced from 6 to 4.

Main informations

Collections

International IEC standards

Thematics

QSE, Sécurité

Publication date

November 2004

Number of pages

3 p.

Reference

IEC 60335-2-98/A1:2004

ICS Codes

97.030   Domestic electrical appliances in general

Print number

1 - 13/06/2005
Sumary
Amendment 1 to the publication IEC 60335-2-98:2002

Specifies standardized nominal cross-section areas from 0.5 mm2 to 2 000 mm2, numbers and diameters of wires and resistance values of conductors in electric cables and flexible cords. Classifies conductors for: 1.Cables for fixed installations -Class 1, solid conductors; -Class 2, stranded conductors. 2.Flexible copper conductors -Class 5, -Class 6 (more flexible than Class 5). Includes table of temperature correction factors kt for conductor resistance to correct the measured resistance at t °C to 20°C. Does not apply to conductors for telecommunication purposes. Applies to conductors of special design only when stated in the specification for the type of cable. Conductors of special design are, for example. conductors for pressure cables, conductors in extra-flexible welding cables or in special types of flexible cables for having the cores twisted together with unusually short lays. This publication supersedes IEC 60180 (1965). Note: -In this edition, the number of classes of conductors has been reduced from 6 to 4.
Standard replaced by (1)
IEC 60335-2-98:2023
December 2023
International standard Current
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers

<!-- NEW! -->IEC 60335-2-98:2023 is available as <a href="https://webstore.iec.ch/publication/90277">IEC 60335-2-98:2023 RLV</a> which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.</br></br>IEC 60335-2-98:2023 deals with the safety of electric humidifiers for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances.<br /> Examples of appliances that are within the scope of the standard are<br /> - appliances that atomize water;<br /> - appliances that evaporate water by heating;<br /> - appliances that blow air through a moist element.<br /> Appliances that are not intended for normal household use, but that nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.<br /> As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account<br /> - persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;<br /> - children playing with the appliance.<br /> Attention is drawn to the fact that<br /> - for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;<br /> - in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.<br /> This standard does not apply to<br /> - appliances for heating liquids (IEC 60335-2-15);<br /> - humidifiers intended for use with heating, ventilation or air-conditioning systems (IEC 60335-2-88);<br /> - appliances for medical purposes (IEC 60601 series);<br /> - appliances intended exclusively for industrial purposes;<br /> - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).<br /> This third edition cancels and replaces the second edition published in 2002, Amendment 1:2004 and Amendment 2:2008. This edition constitutes a technical revision.<br /> This edition includes the following significant technical changes with respect to the previous edition:<br /> a) alignment with IEC 60335-1:2020;<br /> b) additional requirements for a humidifier shaped or decorated like a toy (7.12, 8.1.1, 21.101, 22.12, 22.44, 22.54, 22.105);<br /> c) additional requirements are included for the temperature of accessible surfaces (11.8);<br /> d) application of test probes 18 and 19 has been introduced (Clause 8, 20.2, B.22.3, B.22.4);<br /> e) additional guidance is provided for humidifiers for remote operation.<br /> This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ