IEC 60424-3:2015

Gives guidance on allowable limits of surface irregularities applicable to ETD-cores, E-cores and other similar shapes in accordance with the relevant general specification.

IEC 63093-11:2018 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EC-cores made of ferrite and the essential dimensions of coil formers to be used with them, as well the effective parameter values to be used in calculations involving them. It also gives guidelines on allowable limits of surface irregularities applicable to EC-cores. The specifications contained in this document are useful in negotiations between ferrite core manufacturers and customers about surface irregularities. This first edition cancels and replaces the first edition of IEC 62317-11 published in 2015 and the second edition of IEC 60424-3 published in 2015. This edition constitutes a technical revision. This document includes the following significant technical changes with respect to IEC 62317­11:2015 and IEC 60424-3:2015: a) This document integrates IEC 62317-11:2015 and IEC 60424­3:2015; b) Table 3 – Allowable areas of chips for EC-cores, of IEC 60424-3:2015, has been moved to Annex B (informative) of this document.

IEC 63093-8:2018 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of E-cores made of ferrite and the essential dimensions of coil formers to be used with them, as well the effective parameter values to be used in calculations involving them. It also gives guidelines on allowable limits of surface irregularities applicable to E-cores. The specifications contained in this document are useful in negotiations between ferrite core manufacturers and customers about surface irregularities. The use of derived standards, which give more detailed specifications of component parts while still permitting compliance with this standard, is discussed in Annex A. This edition includes the following significant technical changes with respect to IEC 62317-­8:2006 and IEC 60424-3:2015: a. This document integrates IEC 62317-8:2006 and IEC 60424-3:2015; b. Table 4 – Allowable areas of chips for E-cores, of IEC 60424-3:2015, has been moved to Annex C (informative) of this document.

IEC 63093-6:2018 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ETD-cores made of ferrite and the essential dimensions of coil formers to be used with them, as well the effective parameter values to be used in calculations involving them. It also gives guidelines on allowable limits of surface irregularities applicable to ETD-cores. The specifications contained in this document are useful in negotiations between ferrite core manufacturers and users about surface irregularities. The use of derived standards which give more detailed specifications of component parts while still permitting compliance with this document is discussed in <span style='mso-fareast-language:JA'><span style='mso-spacerun:yes'> REF _Ref506796608 \r \h <span style='mso-element:field-separator'>Annex A 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003500300036003700390036003600300038000000 <span style='mso-fareast-language: JA'>. This edition includes the following significant technical changes with respect to IEC 62317-­6:2015 and IEC 60424-3:2015: a. This document integrates IEC 62317-6:2015 and IEC 60424-3:2015; b. Table 1 – Allowable areas of chips for ETD-cores, of IEC 60424-3:2015, has been moved to Annex C (informative) of this document.