IEC 60470:1974
IEC 60470:1974

IEC 60470:1974

January 1974
International standard Cancelled

High-voltage alternating current contactors

Applies to contactors intended for closing and opening electric circuits, and, if combined with suitable relays, for protecting those circuits against operating overloads which may occur therein. Intended to state the characteristics of contactors; the conditions with which contactors shall comply with reference to their operation and behaviour and their dielectric properties; the tests intended for confirming that these conditions have been met and the methods to be adopted for these tests; the data to be marked on the apparatus.

Main informations

Collections

International IEC standards

Publication date

January 1974

Number of pages

51 p.

Reference

IEC 60470:1974

ICS Codes

29.130.10   High voltage switchgear and controlgear

Print number

1
Sumary
High-voltage alternating current contactors

Applies to contactors intended for closing and opening electric circuits, and, if combined with suitable relays, for protecting those circuits against operating overloads which may occur therein. Intended to state the characteristics of contactors; the conditions with which contactors shall comply with reference to their operation and behaviour and their dielectric properties; the tests intended for confirming that these conditions have been met and the methods to be adopted for these tests; the data to be marked on the apparatus.
Standard replaced by (1)
IEC 60470:1999
IEC 60470:1999
October 1999
International standard Cancelled
High-voltage alternating current contactors and contactor-based motor-starters

Applicable to a.c. contactors and/or contactor-based motor-starters designed for indoor installation and operation at frequencies up to and including 60 Hz on systems having voltages above 1 000 V but not exceeding 12 000 V. Applicable only to three-pole contactors and starters for use in three-phase systems and single-pole contactors and starters for use in single-phase systems.

Need to identify, monitor and decipher standards?