IEC 60534-2:1978
Collections
International IEC standards
Publication date
January 1978
Number of pages
21 p.
Reference
IEC 60534-2:1978
Print number
1
IEC 60534-2:1978
January 1978
International standard
Cancelled
Industrial-process control valves. Part 2: Flow capacity. Section One: Sizing equations for incompressible fluid flow under installed conditions
Deals with a general sizing equation for incompressible fluid flow under installed conditions. Factors are introduced which permit accurate sizing when choked conditions exist due to either cavitation or flashing. Procedures and factors are incorporated to handle installations where the valve is installed between fittings such as reducers, expanders, etc. A Reynolds number factor allows for applications where non-turbulent flow conditions exist caused by low differential pressure and/or high viscosity fluids. Numerical constants are presented permitting the use of three recognized flow coefficients: Av, Kv, and Cv.
Main informations
See more
See less
Sumary
Industrial-process control valves. Part 2: Flow capacity. Section One: Sizing equations for incompressible fluid flow under installed conditions
Deals with a general sizing equation for incompressible fluid flow under installed conditions. Factors are introduced which permit accurate sizing when choked conditions exist due to either cavitation or flashing. Procedures and factors are incorporated to handle installations where the valve is installed between fittings such as reducers, expanders, etc. A Reynolds number factor allows for applications where non-turbulent flow conditions exist caused by low differential pressure and/or high viscosity fluids. Numerical constants are presented permitting the use of three recognized flow coefficients: Av, Kv, and Cv.
Deals with a general sizing equation for incompressible fluid flow under installed conditions. Factors are introduced which permit accurate sizing when choked conditions exist due to either cavitation or flashing. Procedures and factors are incorporated to handle installations where the valve is installed between fittings such as reducers, expanders, etc. A Reynolds number factor allows for applications where non-turbulent flow conditions exist caused by low differential pressure and/or high viscosity fluids. Numerical constants are presented permitting the use of three recognized flow coefficients: Av, Kv, and Cv.
See more
Voir moins
Standard replaced by
(1)
IEC 60534-2-1:1998
September 1998
International standard
Cancelled
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
Includes equations for predicting the fow of compressible and incompressible fluids through control valves. Not intended for use when non-Newtonian fluids, fluid mixtures, slurries, or liquid-solid conveyance systems are encoutnererd. Equations for compressible fluids are for use with gas or vapour and are not inteded for use with multiphase streams such as gas-liquid, vapour-liquid or gas-solid mixtures. Valid for valves with xT smaller or equal to 0,84. The contents of the corrigendum of February 2000 have been included in this copy.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ