IEC 60730-1:1999
IEC 60730-1:1999

IEC 60730-1:1999

May 1999
International standard Cancelled

Automatic electrical controls for household and similar use - Part 1: General requirements

In general, this standard applies to the safety of automatic electrical controls, including controls using NTC or PTC thermistors, for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This part 1 is to be used in conjunction with the appropriate part 2 for a particular type of control, or for controls for particular applications. This part 1 may also be applied, so far as reasonable, to controls not mentioned in a part 2.

Main informations

Collections

International IEC standards

Publication date

May 1999

Number of pages

514 p.

Reference

IEC 60730-1:1999

ICS Codes

97.120   Automatic controls for household use

Print number

1
Sumary
Automatic electrical controls for household and similar use - Part 1: General requirements

In general, this standard applies to the safety of automatic electrical controls, including controls using NTC or PTC thermistors, for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This part 1 is to be used in conjunction with the appropriate part 2 for a particular type of control, or for controls for particular applications. This part 1 may also be applied, so far as reasonable, to controls not mentioned in a part 2.
Replaced standards (3)
IEC 60730-1:1993/AMD1:1994
International standard Cancelled
Amendment 1 - Automatic electrical controls for household and similar use - Part 1: General requirements

Includes requirements for electronic controls.

IEC 60730-1:1993/AMD2:1997
International standard Cancelled
Amendment 2 - Automatic electrical controls for household and similar use - Part 1: General requirements

IEC 60730-1:1993
IEC 60730-1:1993
October 1993
International standard Cancelled
Automatic electrical controls for household and similar use - Part 1: General requirements

Applies to automatic electrical controls for household and similar use. Part 1 gives the general requirements. Parts 2 to be used in co njunction with Part 1 will give particular requirements for specific types of controls.

Standard replaced by (1)
IEC 60730-1:2010
IEC 60730-1:2010
March 2010
International standard Cancelled
Automatic electrical controls for household and similar use - Part 1: General requirements

IEC 60730-1:2010 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard also applies to the inherent safety; to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical control devices used in, or in association with, household or similar equipment. This standard is also applicable to controls for appliances within the scope of IEC 60335-1 as well as controls for building automation systems within the scope of ISO 16484-2. The principal changes in this edition as compared to the previous edition are as follows: - changes to the low temperature test requirements for in-line cords; - revision to the pollution degree for the environment surronding contacts; - addition of the use of screwless terminals on printed circuit boards and revisions to creepage distances; - additions of CISPR 11 EMC requirements; - incorporation of EMC test levels from IEC 60335 series; - additional testing for flexible cords; - revisions to the requirements for resistance to heat, fire and tracking including replacement of clause 21 and Annexes F and G; - new Annex T for additional requirements for non-SELV supplied sensor cable or cord; - new requirements in H.27.1 for first and second fault approach to ensure functional safety; - incorporation of software techniques from IEC 61508-3 in H.11.12; - replacement of Annex D (Canada and USA) with reference to UL 746C; - updates to the references and bibliography; - the keyword index was deleted.

Need to identify, monitor and decipher standards?