IEC 60793-1-46:2001
Collections
International IEC standards
Publication date
July 2001
Number of pages
23 p.
Reference
IEC 60793-1-46:2001
IEC 60793-1-46:2001
July 2001
International standard
Cancelled
Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
Gives two methods for monitoring the changes in optical transmittance of optical fibres and cables that occur during mechanical and environmental testing. It provides a monitor in the change of optical transmission characteristics arising from optical discontinuity, physical defects and modifications of the attenuation slope. The methods are the change in transmittance by transmitted power, and by backscattering. They apply to both multimode and single-mode fibres.
Main informations
See more
See less
Sumary
Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
Gives two methods for monitoring the changes in optical transmittance of optical fibres and cables that occur during mechanical and environmental testing. It provides a monitor in the change of optical transmission characteristics arising from optical discontinuity, physical defects and modifications of the attenuation slope. The methods are the change in transmittance by transmitted power, and by backscattering. They apply to both multimode and single-mode fibres.
Gives two methods for monitoring the changes in optical transmittance of optical fibres and cables that occur during mechanical and environmental testing. It provides a monitor in the change of optical transmission characteristics arising from optical discontinuity, physical defects and modifications of the attenuation slope. The methods are the change in transmittance by transmitted power, and by backscattering. They apply to both multimode and single-mode fibres.
See more
Voir moins
Replaced standards
(4)
IEC 60793-1-4:1995/AMD1:1996
August 1996
International standard
Cancelled
Amendment 1 - Optical fibres - Part 1: Generic specification - Section 4: Measuring methods for transmission and optical characteristics
IEC 60793-1-4:2001
February 2001
International standard
Cancelled
Optical fibres - Part 1-4: Generic specification - Measuring methods for transmission and optical characteristics
Applies to practical measurements of transmission and optical parameters of fibres. The methods are for use in inspection of fibres and cables for commercial purposes.
IEC 60793-1-4:1995
December 1995
International standard
Cancelled
Optical fibres - Part 1: Generic specification - Section 4: Measuring methods for transmission and optical characteristics
Applies to the practical measurements of transmission and optical parameters of fibre. The methods are to be used for inspection of fibres and cables for commercial purposes. to establish uniform requirements.
IEC 60793-1-4:1995/AMD2:1998
January 1998
International standard
Cancelled
Amendment 2 - Optical fibres - Part 1: Generic specification - Section 4: Measuring methods for transmission and optical characteristics
See more
See less
See more
Standard replaced by
(1)
IEC 60793-1-46:2024
June 2024
International standard
Current
Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in attenuation
IEC 60793-1-46:2024 establishes uniform requirements for the monitoring of changes in attenuation, thereby assisting in the inspection of fibres and cables for commercial purposes. This document gives two methods for monitoring the changes in attenuation of optical fibres and cables that occur during mechanical or environmental testing, or both. It provides a monitor in the change of attenuation characteristics arising from optical discontinuity, physical defects and modifications of the attenuation slope: - method A: change in attenuation by transmitted power; - method B: change in attenuation by backscattering. Methods A and B apply to the monitoring of all categories of the following fibres: - class A: multimode fibres; - class B: single-mode fibres; - class C: single-mode intraconnection fibres. Information common to both measurements is contained in Clause 1 to Clause 10, and information pertaining to each individual method appears in Annex A, and Annex B respectively.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ