IEC 61008-1:2024
IEC 61008-1:2024

IEC 61008-1:2024

November 2024
International standard Current

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

IEC 61008-1:2024 gives general requirements and tests for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (hereafter referred to as RCCBs), for rated operational voltages not exceeding 440 V AC, with rated frequencies of 50 Hz, 60 Hz or 50/60 Hz and rated currents not exceeding 125 A, intended principally for protection against shock hazard.This fourth edition cancels and replaces the third edition published in 2010, Amendment 1:2012 and Amendment 2:2013. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:a) harmonization of all clauses between the IEC 61008, IEC 61009 and IEC 60755 series using blocks and modules approach;b) harmonization of all tables and figures between the IEC 61008, IEC 61009 and IEC 60755 series;c) terms and definitions are now referred to IEC 62873-2;d) modification of 4.1 for classification according to supply conditions;e) new subclauses 8.17 and 9.24 for requirements and tests for the resistance to temporary overvoltages (TOV);f) improvement of 9.8 for test of dielectric properties;g) tests for screwless, flat-quick terminals and aluminium conductors are now referred to the IEC 62873-3 series.

Main informations

Collections

International IEC standards

Publication date

November 2024

Number of pages

240 p.

Reference

IEC 61008-1:2024

ICS Codes

29.120.50   Fuses and other overcurrent protection devices
Sumary
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

IEC 61008-1:2024 gives general requirements and tests for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (hereafter referred to as RCCBs), for rated operational voltages not exceeding 440 V AC, with rated frequencies of 50 Hz, 60 Hz or 50/60 Hz and rated currents not exceeding 125 A, intended principally for protection against shock hazard.
This fourth edition cancels and replaces the third edition published in 2010, Amendment 1:2012 and Amendment 2:2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) harmonization of all clauses between the IEC 61008, IEC 61009 and IEC 60755 series using blocks and modules approach;
b) harmonization of all tables and figures between the IEC 61008, IEC 61009 and IEC 60755 series;
c) terms and definitions are now referred to IEC 62873-2;
d) modification of 4.1 for classification according to supply conditions;
e) new subclauses 8.17 and 9.24 for requirements and tests for the resistance to temporary overvoltages (TOV);
f) improvement of 9.8 for test of dielectric properties;
g) tests for screwless, flat-quick terminals and aluminium conductors are now referred to the IEC 62873-3 series.
Replaced standards (5)
IEC 61008-1:2010
IEC 61008-1:2010
February 2010
International standard Cancelled
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

IEC 61008-1:2010 applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporating overcurrent protection (hereafter referred to as RCCBs), for rated voltages not exceeding 440 V a.c. with rated frequencies of 50 Hz, 60 Hz or 50/60 Hz and rated currents not exceeding 125 A, intended principally for protection against shock hazard. This third edition cancels and replaces the second edition published in 1996, amendment 1 (2002) and amendment 2 (2006). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - complete revision of EMC sequences, including the new test T.2.6 already approved in IEC 61543; - clarification of RCDs current/time characteristics reported in Tables 1 and 2; - revision of test procedure for IΔn between 5 A and 200 A; - testing procedure regarding the 6mA d.c. current superimposed to the fault current; - improvement highlighting RCDs with multiple sensitivity; - tests for the use of RCCBs in IT systems.

IEC 61008-1:2010/AMD2:2013/COR1:2014
International standard Cancelled
Corrigendum 1 - Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

IEC 61008-1:2010/AMD1:2012/COR1:2016
International standard Cancelled
Corrigendum 1 - Amendment 1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBS) - Part 1: General rules

IEC 61008-1:2010/AMD1:2012
International standard Cancelled
Amendment 1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

The contents of the corrigendum of May 2016 have been included in this copy.

IEC 61008-1:2010/AMD2:2013
International standard Cancelled
Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

The contents of the corrigendum of January 2014 have been included in this copy.

See more
ZOOM ON ... the Requirements department

To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:

  • mandatory clauses to satisfy,
  • non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document "ISO/IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents" as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!


Need to identify, monitor and decipher standards?