IEC 61010-2-010:2019
Collections
International IEC standards
Publication date
February 2019
Number of pages
50 p.
Reference
IEC 61010-2-010:2019
IEC 61010-2-010:2019
February 2019
International standard
Current
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2019 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever the heating of materials is one of the functions of the equipment.a) Electrical test and measurement equipmentThis is equipment which by electromagnetic means tests, measures, indicates or recordsone or more electrical or physical quantities, also non-measuring equipment such assignal generators, measurement standards, power supplies for laboratory use,transducers, transmitters, etc.b) Electrical industrial process-control equipmentThis is equipment which controls one or more output quantities to specific values, witheach value determined by manual setting, by local or remote programming, or by one ormore input variables.c) Electrical laboratory equipmentThis is equipment which measures, indicates, monitors, inspects or analyses materials, oris used to prepare materials, and includes in vitro diagnostic (IVD) equipment. This fourth edition cancels and replaces the third edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:a) alignment with changes introduced by Amendment 1 of IEC 61010-1:2010;b) alignment with IEC 61010-2-011 and IEC 61010-2-012:- new matching Introduction clarifying which standard(s) to use;- new 5.4.101 instructions for flammable liquid;- subclause 9.5 on flammable liquids replaced with text from IEC 61010-2-012;c) subclause 5.2.101 deleted;d) requirements in 10.101 b) and c) clarified.It has the status of a group safety publication in accordance with IEC Guide 104.
Main informations
See more
See less
Sumary
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2019 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever the heating of materials is one of the functions of the equipment.
a) Electrical test and measurement equipment
This is equipment which by electromagnetic means tests, measures, indicates or records
one or more electrical or physical quantities, also non-measuring equipment such as
signal generators, measurement standards, power supplies for laboratory use,
transducers, transmitters, etc.
b) Electrical industrial process-control equipment
This is equipment which controls one or more output quantities to specific values, with
each value determined by manual setting, by local or remote programming, or by one or
more input variables.
c) Electrical laboratory equipment
This is equipment which measures, indicates, monitors, inspects or analyses materials, or
is used to prepare materials, and includes in vitro diagnostic (IVD) equipment. This fourth edition cancels and replaces the third edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with changes introduced by Amendment 1 of IEC 61010-1:2010;
b) alignment with IEC 61010-2-011 and IEC 61010-2-012:
- new matching Introduction clarifying which standard(s) to use;
- new 5.4.101 instructions for flammable liquid;
- subclause 9.5 on flammable liquids replaced with text from IEC 61010-2-012;
c) subclause 5.2.101 deleted;
d) requirements in 10.101 b) and c) clarified.
It has the status of a group safety publication in accordance with IEC Guide 104.
IEC 61010-2-010:2019 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever the heating of materials is one of the functions of the equipment.
a) Electrical test and measurement equipment
This is equipment which by electromagnetic means tests, measures, indicates or records
one or more electrical or physical quantities, also non-measuring equipment such as
signal generators, measurement standards, power supplies for laboratory use,
transducers, transmitters, etc.
b) Electrical industrial process-control equipment
This is equipment which controls one or more output quantities to specific values, with
each value determined by manual setting, by local or remote programming, or by one or
more input variables.
c) Electrical laboratory equipment
This is equipment which measures, indicates, monitors, inspects or analyses materials, or
is used to prepare materials, and includes in vitro diagnostic (IVD) equipment. This fourth edition cancels and replaces the third edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with changes introduced by Amendment 1 of IEC 61010-1:2010;
b) alignment with IEC 61010-2-011 and IEC 61010-2-012:
- new matching Introduction clarifying which standard(s) to use;
- new 5.4.101 instructions for flammable liquid;
- subclause 9.5 on flammable liquids replaced with text from IEC 61010-2-012;
c) subclause 5.2.101 deleted;
d) requirements in 10.101 b) and c) clarified.
It has the status of a group safety publication in accordance with IEC Guide 104.
See more
Voir moins
Replaced standards
(1)
IEC 61010-2-010:2014
September 2014
International standard
Cancelled
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2014 specifies safety requirements for electrically powered laboratory equipment for the heating of materials, where the heating of materials is one of the functions of the equipment. This third edition cancels and replaces the second edition published in 2003. It constitutes a technical revision and includes the following significant changes from the second edition, as well as numerous other changes: - added a definition for HEAT TRANSFER MEDIUM to Clause 3; - added a symbol for FLAMMABLE LIQUID to Table 1 in Clause 5; - added a requirement for instructions pertaining to ventilation in Clause 5; - modified the requirements for humidity preconditioning in Clause 6; - added requirements for equipment containing or using flammable liquids to Clause 9; - added requirements for over-temperature protection devices to Clause 10. It has the status of a horizontal standard in accordance with IEC Guide 104. This publication is to be read in conjunction with IEC 61010-1:2010.
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ