IEC 61019-2:2005

May 2005

International standard Current

Surface acoustic wave (SAW) resonators - Part 2: Guide to the use

IEC 61019-2:2005 gives practical guidance to the use of surface acoustic wave (SAW) resonators which are used in telecommunications, radio equipments and consumer products. It is to be used in conjunction with IEC 61019-1. The features of SAW resonators are small size, light weight, adjustment-free and high stability,operating frequencies extend to the VHF and UHF ranges. The main changes with respect to the previous editon are listed below:- at the end of 5.1, the edge reflector has been added. Its reference literature has been inserted in the bibliography;- in Table 1, the propagation properties of LiNbO3 (64° Y) have been added;- in Table 3, the clause and subclause numbers have been corrected in order to be consistent with IEC 61019-1 (2004) which has replaced IEC 61019-1-1 (1990) and IEC 61019-1-2 (1993).

Main informations

Collections

International IEC standards

Publication date

May 2005

Number of pages

26 p.

Reference

IEC 61019-2:2005

ICS Codes

31.140 Piezoelectric devices

Print number

1 - juillet 2005

Sumary

Surface acoustic wave (SAW) resonators - Part 2: Guide to the use

IEC 61019-2:2005 gives practical guidance to the use of surface acoustic wave (SAW) resonators which are used in telecommunications, radio equipments and consumer products. It is to be used in conjunction with IEC 61019-1. The features of SAW resonators are small size, light weight, adjustment-free and high stability,operating frequencies extend to the VHF and UHF ranges. The main changes with respect to the previous editon are listed below:
- at the end of 5.1, the edge reflector has been added. Its reference literature has been inserted in the bibliography;
- in Table 1, the propagation properties of LiNbO3 (64° Y) have been added;
- in Table 3, the clause and subclause numbers have been corrected in order to be consistent with IEC 61019-1 (2004) which has replaced IEC 61019-1-1 (1990) and IEC 61019-1-2 (1993).

Replaced standards (1)

IEC 61019-2:1995

June 1995

International standard Cancelled

Surface acoustic wave (SAW) resonators - Part 2: Guide to the use

Draws attention to some of the fundamental questions, which should be considered by the user before he places an order for a SAW resonator for a new application.

ZOOM ON ... the Requirements department

To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ