IEC 61280-4-1:2003

IEC 61280-4-1:2003

September 2003
International standard Cancelled

Fibre-optic communication subsystem test procedures - Part 4-1: Cable plant and links - Multimode fibre-optic cable plant attenuation measurement

Establishes preferred measurement principles and practices to assure that meaningful data describing the optical loss performance of installed cable plants can be obtained.It is not intended for component testing, it does not define those elements of an installation that need to be measured. This procedure is a specific test associated with IEC 61281-1. This procedure can be used to measure the optical loss between any two passively connected points, including end terminations, of a multimode optical fibre cable plant.

Main informations

Collections

International IEC standards

Publication date

September 2003

Number of pages

37 p.

Reference

IEC 61280-4-1:2003

Print number

1 - 13/06/2005
Sumary
Fibre-optic communication subsystem test procedures - Part 4-1: Cable plant and links - Multimode fibre-optic cable plant attenuation measurement

Establishes preferred measurement principles and practices to assure that meaningful data describing the optical loss performance of installed cable plants can be obtained.It is not intended for component testing, it does not define those elements of an installation that need to be measured. This procedure is a specific test associated with IEC 61281-1. This procedure can be used to measure the optical loss between any two passively connected points, including end terminations, of a multimode optical fibre cable plant.
Standard replaced by (1)
IEC 61280-4-1:2009
June 2009
International standard Cancelled
Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement

IEC 61280-4-1:2009 is applicable to the measurement of attenuation of installed fibre-optic cabling using multimode fibre, typically in lengths of up to 2 000 m. This cabling can include multimode fibres, connectors, adapters and splices. In this standard, the fibre types that are addressed include category A1a (50/125 µm) and A1b (62,5/125 µm) multimode fibres, as specified in IEC 60793-2-10. The attenuation measurements of the other multimode categories can be made, using the approaches of this standard, but the source conditions for the other categories have not been defined. The main changes with respect to the previous edition are: - An additional measurement method based on optical time domain reflectometry (OTDR) is documented, with guidance on best practice in using the OTDR and interpreting OTDR traces. - The requirement for the sources used to measure multimode fibres is changed from one based on coupled power ratio (CPR) and mandrel requirement to one based on measurements of the near field at the output of the launching test cord. - Highlighting the importance of, and giving guidance on, good measurement practices including cleaning and inspection of connector end faces.

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ