IEC 61439-7:2018
Collections
International IEC standards
Publication date
December 2018
Number of pages
76 p.
Reference
IEC 61439-7:2018
IEC 61439-7:2018
December 2018
International standard
Cancelled
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
IEC 61439-7:2018 defines the specific requirements of assemblies as follows:- assemblies for which the rated voltage does not exceed 1 000 V in the case of AC or 1 500 V in the case of DC;? assemblies intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment;? assemblies operated by ordinary persons (e.g. plug and unplug of electrical equipment);? assemblies intended to be installed and used in market squares, marinas, campsites and other similar outdoor public sites;? assemblies intended for charging stations for electric vehicles (AEVCS) for Mode 3 and Mode 4. They are designed to integrate the functionality and additional requirements for electric vehicle conductive charging systems according to IEC 61851-1:2017.This first edition cancels and replaces the relevant technical specification published in 2014. It constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous technical specification: a new classification of the stationary ASSEMBLIES in accordance with their mechanical resistance (5.702); a new Table 702 with the list of tests and relevant severities to which the ASSEMBLIES have to be subjected according to the classification mentioned at point a); a new Annex (CC) with a new endurance test for the individual switching devices intended to be used in AEVSC, if they have not already been tested against this requirement; a general editorial review and a technical revision.The contents of the corrigendum of August 2019 have been included in this copy.
Main informations
See more
See less
Sumary
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
IEC 61439-7:2018 defines the specific requirements of assemblies as follows:
- assemblies for which the rated voltage does not exceed 1 000 V in the case of AC or 1 500 V in the case of DC;
? assemblies intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment;
? assemblies operated by ordinary persons (e.g. plug and unplug of electrical equipment);
? assemblies intended to be installed and used in market squares, marinas, campsites and other similar outdoor public sites;
? assemblies intended for charging stations for electric vehicles (AEVCS) for Mode 3 and Mode 4. They are designed to integrate the functionality and additional requirements for electric vehicle conductive charging systems according to IEC 61851-1:2017.
This first edition cancels and replaces the relevant technical specification published in 2014. It constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous technical specification:
IEC 61439-7:2018 defines the specific requirements of assemblies as follows:
- assemblies for which the rated voltage does not exceed 1 000 V in the case of AC or 1 500 V in the case of DC;
? assemblies intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment;
? assemblies operated by ordinary persons (e.g. plug and unplug of electrical equipment);
? assemblies intended to be installed and used in market squares, marinas, campsites and other similar outdoor public sites;
? assemblies intended for charging stations for electric vehicles (AEVCS) for Mode 3 and Mode 4. They are designed to integrate the functionality and additional requirements for electric vehicle conductive charging systems according to IEC 61851-1:2017.
This first edition cancels and replaces the relevant technical specification published in 2014. It constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous technical specification:
- a new classification of the stationary ASSEMBLIES in accordance with their mechanical resistance (5.702);
- a new Table 702 with the list of tests and relevant severities to which the ASSEMBLIES have to be subjected according to the classification mentioned at point a);
- a new Annex (CC) with a new endurance test for the individual switching devices intended to be used in AEVSC, if they have not already been tested against this requirement;
- a general editorial review and a technical revision.
See more
Voir moins
Replaced standards
(1)
IEC TS 61439-7:2014
February 2014
Technical specification
Cancelled
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations
IEC TS 61439-7:2014-02(en-fr) defines the specific requirements of ASSEMBLIES as follows: - ASSEMBLIES for which the rated voltage does not exceed 1 000 V in case of a.c. or 1 500 V in case of d.c; - stationary or movable ASSEMBLIES with enclosure; - ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment; - ASSEMBLIES operated by ordinary persons; - ASSEMBLIES intended to be installed and used in marinas, camping sites, market squares and other similar external public sites or similar sites; - ASSEMBLIES intended for charging stations for electric vehicles. This publication is to be read in conjunction with IEC 61439-1:2011
Standard replaced by
(1)
IEC 61439-7:2022
July 2022
International standard
Current
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
IEC 61439-7:2022 defines the specific requirements for assemblies for the following applications: marinas, camping sites, market squares and electric vehicle charging stations as follows: - assemblies for which the rated voltage does not exceed 1 000 V AC or 1 500 V DC; - assemblies intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment; - assemblies operated by ordinary persons (e.g. to plug and unplug of electrical equipment); - assemblies intended to be installed and used in market squares, marinas, camping sites and other similar sites accessible to the public including temporary installations; - assemblies intended for charging stations for electric vehicles (AEVCS) for Mode 3 and Mode 4. They are designed to integrate the functionality and additional requirements for electric vehicle conductive charging systems according to IEC 61851-1:2017. This second edition cancels and replaces the first edition published in 2018. It constitutes a technical revision. This edition includes the following changes with respect to the previous technical specification: - a general editorial review and a technical revision.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ