IEC 61756-1:2019
Collections
International IEC standards
Publication date
November 2019
Number of pages
62 p.
Reference
IEC 61756-1:2019
IEC 61756-1:2019
November 2019
International standard
Current
Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance
IEC 61756-1:2019 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:- addition of figures to show the interface between protective housing and fibre management system;- addition of definitions for protective housing, closure, wall box, street cabinets and optical distribution frame modules;- addition of table with dimensions of fusion splice protectors and mechanical splices;- addition of method to identify the minimum bending radius for stored fibres;- addition of clause for other factors relevant to fibre management systems;- addition of annex A for example of calculating the minimum bending radius of stored fibres in a fibre management system.Keywords: fibre management system interfaces, minimum bending radius for stored fibres
Main informations
See more
See less
Sumary
Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance
IEC 61756-1:2019 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of figures to show the interface between protective housing and fibre management system;
- addition of definitions for protective housing, closure, wall box, street cabinets and optical distribution frame modules;
- addition of table with dimensions of fusion splice protectors and mechanical splices;
- addition of method to identify the minimum bending radius for stored fibres;
- addition of clause for other factors relevant to fibre management systems;
- addition of annex A for example of calculating the minimum bending radius of stored fibres in a fibre management system.
Keywords: fibre management system interfaces, minimum bending radius for stored fibres
IEC 61756-1:2019 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of figures to show the interface between protective housing and fibre management system;
- addition of definitions for protective housing, closure, wall box, street cabinets and optical distribution frame modules;
- addition of table with dimensions of fusion splice protectors and mechanical splices;
- addition of method to identify the minimum bending radius for stored fibres;
- addition of clause for other factors relevant to fibre management systems;
- addition of annex A for example of calculating the minimum bending radius of stored fibres in a fibre management system.
Keywords: fibre management system interfaces, minimum bending radius for stored fibres
See more
Voir moins
Replaced standards
(1)
IEC 61756-1:2006
May 2006
International standard
Cancelled
Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance
This part of IEC 61756 covers general information on the subject of fibre management system (FMS) interfaces. It includes references, document structure details, definitions and the rules under which a FMS interface is created. This interface standard defines a fibre management system which is part of an optical network. It provides facilities for the direct exchange of optical signals between the incoming and outgoing fibre optic cables. In order to comply with the standard, the optical functionality, physical, geometrical and mechanical requirements shall be met.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ