IEC 62108:2016

IEC 62108:2016

September 2016
International standard Cancelled

Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

IEC 62108:2016 specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic (CPV) modules and assemblies suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. The test sequence is partially based on that specified in IEC 61215-1. The object of this test standard is to determine the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and to show that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope. This new edition includes the following main technical changes with regard to the previous one:a) changes in outdoor exposure from 1000 h to 500 h;b) changes in current cycling during thermal cycling test;c) added dust ingress test;d) eliminated thermal cycling associated with damp heat test;e) eliminated UV exposure test.

Main informations

Collections

International IEC standards

Publication date

September 2016

Number of pages

101 p.

Reference

IEC 62108:2016
Sumary
Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

IEC 62108:2016 specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic (CPV) modules and assemblies suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. The test sequence is partially based on that specified in IEC 61215-1. The object of this test standard is to determine the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and to show that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope. This new edition includes the following main technical changes with regard to the previous one:
a) changes in outdoor exposure from 1000 h to 500 h;
b) changes in current cycling during thermal cycling test;
c) added dust ingress test;
d) eliminated thermal cycling associated with damp heat test;
e) eliminated UV exposure test.
Replaced standards (1)
IEC 62108:2007
December 2007
International standard Cancelled
Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

Specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic modules and assemblies suitable for long-term operation in general open-air climates. The test sequence is partially based on that specified in IEC 61215. Determines the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and shows that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope.

Standard replaced by (1)
IEC 62108:2022
June 2022
International standard Current
Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

IEC 62108:2022 specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic (CPV) modules and assemblies suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. The object of this test document is to determine the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and to show, as far as possible within reasonable constraints of cost and time, that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ