IEC 62149-4:2022
Collections
International IEC standards
Publication date
December 2022
Number of pages
31 p.
Reference
IEC 62149-4:2022
IEC 62149-4:2022
December 2022
International standard
Current
Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
IEC 62149-4:2022 defines performance specifications for 1 300 nm fibre optic transceiver modules used for the ISO/IEC/IEEE 8802-3 Gigabit Ethernet application. This document contains definitions for product performance requirements as well as a series of tests and measurements, for which clearly defined conditions, severities and pass/fail criteria are provided. The tests are intended to be run on a "once-off" basis to prove any product?s ability to satisfy the performance standard?s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard but will then be controlled by a quality assurance/quality conformance program. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:- the normative references are updated;- the condition "for short periods" in 4.1 is removed;- the absolute limiting rating for soldering temperature in Table 1 is modified;- the maximal optical output power (multimode fibre) in Table 4 is increased from ?3,5 dBm to ?3 dBm, to align value with the referenced document;- a note is added to Table 7 to clarify that out-of-specification products are not allowed to pass the performance tests.
Main informations
See more
See less
Sumary
Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
IEC 62149-4:2022 defines performance specifications for 1 300 nm fibre optic transceiver modules used for the ISO/IEC/IEEE 8802-3 Gigabit Ethernet application. This document contains definitions for product performance requirements as well as a series of tests and measurements, for which clearly defined conditions, severities and pass/fail criteria are provided. The tests are intended to be run on a "once-off" basis to prove any product?s ability to satisfy the performance standard?s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard but will then be controlled by a quality assurance/quality conformance program. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- the normative references are updated;
- the condition "for short periods" in 4.1 is removed;
- the absolute limiting rating for soldering temperature in Table 1 is modified;
- the maximal optical output power (multimode fibre) in Table 4 is increased from ?3,5 dBm to ?3 dBm, to align value with the referenced document;
- a note is added to Table 7 to clarify that out-of-specification products are not allowed to pass the performance tests.
IEC 62149-4:2022 defines performance specifications for 1 300 nm fibre optic transceiver modules used for the ISO/IEC/IEEE 8802-3 Gigabit Ethernet application. This document contains definitions for product performance requirements as well as a series of tests and measurements, for which clearly defined conditions, severities and pass/fail criteria are provided. The tests are intended to be run on a "once-off" basis to prove any product?s ability to satisfy the performance standard?s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard but will then be controlled by a quality assurance/quality conformance program. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- the normative references are updated;
- the condition "for short periods" in 4.1 is removed;
- the absolute limiting rating for soldering temperature in Table 1 is modified;
- the maximal optical output power (multimode fibre) in Table 4 is increased from ?3,5 dBm to ?3 dBm, to align value with the referenced document;
- a note is added to Table 7 to clarify that out-of-specification products are not allowed to pass the performance tests.
See more
Voir moins
Replaced standards
(1)
IEC 62149-4:2010
April 2010
International standard
Cancelled
Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
IEC 62149-4:2010 covers the performance specification for 1 300 nm fibre optic transceiver modules used for the ISO/IEC 8802-3 Gigabit Ethernet application. The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a "once-off" basis to prove any product's ability to satisfy the performance standard's requirements. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision that includes changes and additions to the performance tables reflecting new technology.
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ